SD2065-E00-5CF01N Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – BNC 75 PLUG FOR TACHII TCX-5CFBL

NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206.
2. MATERIAL SPECIFICATIONS:
BAYONET SLEEVE, BODY, CONTACT, FERRULE: BRASS PER ASTM B16
INSULATOR: TEFLON PER ASTM D1710
SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194
GASKET: SILICONE RUBBER
3. FINISH SPECIFICATIONS:
BAYONET SLEEVE, BODY, FERRULE: .000100MIN NICKEL PER AMS-QQ-N-290
OVER COPPER FLASH PER ASTM B734 (ROHS)
CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER NICKEL PER
AMS-QQ-N-290 (ROHS)
ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N-290
OVER .000050 MIN COPPER PER ASTM-B734
4. CONTACT AND FERRULE SHIPPED LOOSE.
5. FOR USE WITH TACHII CABLE TCX-5CFBL OR EQUIVALENT.
6. FOR CRIMPING USE KINGS KTH-5000 & KTH-5006 (.32 HEX, .054 SQUARE FLAT).
7. ASSEMBLE TO CABLE USING CAP-E01.
8. THESE AREA HAVE WHITE MARKING.
9. ELECTRIC SPECIFICATIONS:
IMPEDANCE: 75 OHMS
FREQUENCY RANGE: DC TO 3 GHz
RETURN LOSS: 25 dB MIN (DC TO 3 GHz)
.354 8.99
.323 8.20
.354 8.99
.138 3.51
.591 15.01
.748 19.00
RECOMMENDED CABLE
TRIMMING DIMENSIONS
REV
DESCRIPTION
BY
DATE
APPD
REVISED PER
C
ER17023
.199 5.05
MARKING:
KINGS+2065+CABLE CODE+
DATE CODE+LOCATION CODE
.285 7.24
SEE NOTE 8
( 1.372 34.85 )
WHEN ASSEMBLED
CATALOG P/N:2065-E00-5CF01N
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .0005
ANGLES: ± 2°
SCALE: 2:1
CUSTOMER
DRAWING
DRAWN
CY
APPROVED
DCT
DATE APPROVED
03/10/08 RFA
DATE APPROVED
03/11/08 DCam
DATE
03/11/08
DATE
03/11/08
WincheserElecronics
Winchester Electronics Corporation
®
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
BNC 75 PLUG
FOR TACHII TCX-5CFBL
(ROHS COMPLIANT)
REV
A ^{SD2065-E00-5CF01N} 1 ^SHT OF 1 C