SD01432G Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – POWER SNAP, RIGHT ANGLE SOLDER MOUNT 18 AWG 10 AMP

NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000.
2. MATERIAL SPECIFICATIONS:
COPPER ALLOY
3. FINISH SPECIFICATIONS:
.000030 MIN. GOLD PER ASTM B488 OVER .000080 MIN. NICKEL PER AMS QQ-N-290.
4. ELECTRICAL SPECIFICATIONS:
CURRENT RATING: 10 AMPS
5. FOR USE WITH 16 AWG WIRE OR EQUIVALENT.
6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE.
.314 7.98
.144 3.66
.218 5.54
ACROSS FLATS
ACCEPTS .144 PIN
.275 6.99
REV
DESCRIPTION
BY
DATE
APPD
D
REVISED PER
ER7306
.275 6.99
RECOMMENDED CABLE TRIM DIMENSIONS
18 AWG OR
EQUIVILENT
.054±.003 1.37±.08
CATALOG P/N: 01432G
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .XXXX
ANGLES: ± 2°
SCALE: 8:1
WinchesterElectronics
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
CUSTOMER
DRAWING
DRAWN
PSM
APPROVED
XXX
DATE APPROVED
03/08/07 DCam
DATE APPROVED
XX/XX/XX WPM
DATE
05/16/07
DATE
05/16/07
POWER SNAP,
RIGHT ANGLE SOLDER MOUNT
18 AWG, 10 AMP
A
SD01432G
REV
1 1 ^{SHT OF} D