SD01431G Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – POWER SNAP, RIGHT ANGLE SOLDER MOUNT 20 AWG 8 AMP

NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000.
2. MATERIAL SPECIFICATIONS:
BRASS PER ASTM B16
3. FINISH SPECIFICATIONS:
.000030 MIN. GOLD PER ASTM B488 OVER .000080 MIN. NICKEL PER AMS QQ-N-290.
4. ELECTRICAL SPECIFICATIONS:
CURRENT RATING: 8 AMPS
5. FOR USE WITH 20 AWG WIRE OR EQUIVALENT.
6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE.
.167 4.24
.144 3.66
.275 6.99
.218^{+- ..001000} 5.54^+..2050
ACROSS FLATS
.144±.001 3.66±.03
REV
DESCRIPTION
BY
DATE
APPD
B
ER7306
.275 6.99
RECOMMENDED CABLE TRIM DIMENSIONS
.054±.003 1.37±.08
.048 MAX 1.22 MAX
CATALOG P/N: 01431G
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .XXXX
ANGLES: ± 2°
SCALE: 8:1
WinchesterElectronics
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
CUSTOMER
DRAWING
DRAWN
PSM
APPROVED
XXX
DATE APPROVED
03/08/07 DCam
DATE APPROVED
XX/XX/XX WPM
POWER SNAP,
RIGHT ANGLE SOLDER MOUNT
DATE
20 AWG 8 AMP
05/16/07
A ^DATE
05/16/07
SD01431G
REV
1 1 ^{SHT OF} _B