SD01361 Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – POWERSNAP RIGHT ANGLE SOLDER MOUNT 10 AWG, 30 AMP

NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000.
2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16.
3. FINISH SPECIFICATIONS:
BODY: .000030 MIN GOLD PER ASTM B488 OVER
.000050 MIN NICKEL PER AMS-QQ-N-290
4. ELECTRICAL SPECIFICATIONS:
CURRENT RATING: 30 AMP
5. FOR USE WITH 10 GA. OR EQUIVALENT WIRE.
6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE.
.353 8.97
.167 4.24
.144±.001 3.66±.03
.186 4.72
.275 6.99
REV
DESCRIPTION
BY
DATE
APPD
C
REVISED PER
ER7306
.218^{+- ..001000} 5.54^+..2050
ACROSS FLATS
.271 6.88
RECOMMENDED CABLE TRIM DIMENSIONS
SCALE: 2:1
.146±.003 3.71±.08
CATALOG P/N: 01361
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
ANGLES: ± 2°
SCALE: 4:1
WinchesterElectronics
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
CUSTOMER
DRAWING
DRAWN
JEM
APPROVED
JED
DATE APPROVED
10/15/03 CWB
DATE APPROVED
10/15/03 SD
DATE
10/15/03
DATE
10/15/03
POWER SNAP
RIGHT ANGLE SOLDER MOUNT
10 AWG, 30 AMP
A
SD01361
REV
1 1 ^{SHT OF} C