SD01332 Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – POWERSNAP RIGHT ANGLE SOLDER MOUNT 14 AWG, 20 AMP

NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000.
2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16.
3. FINISH SPECIFICATIONS:
.000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290.
4. ELECTRICAL SPECIFICATIONS:
CURRENT RATING: 20 AMPS
5. SUGGESTED FOR USE WITH 14 GA WIRE OR EQUIVALENT.
6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE.
.167 4.24
.144 3.66
REV
DESCRIPTION
BY
DATE
APPD
E ^{REVISED PER ER11418}
.218^{+- ..001000} 5.54^+..2050
ACROSS FLATS
.144±.001 3.66±.03
.275 6.99
,085 MAX
RECOMMENDED CABLE TRIM DIMENSIONS
SCALE: 2:1
DMF029 B
.275 6.99
.095±.003 2.41±.08
CATALOG P/N: 01332
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .XXXX
ANGLES: ± 2°
SCALE: 8:1
CUSTOMER
THIRD
ANGLE
SALES DRAWING
DRAWN
KJT
APPROVED
JEM
DATE APPROVED
01/31/02 JWH
DATE APPROVED
02/01/02 JED
DATE
02/01/02
DATE
02/01/02
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
POWERSNAP
RIGHT ANGLE SOLDER MOUNT
14 AWG, 20 AMP
A
SD01332
SHT OF _REV
11 ^E