RM34W2P-1000 Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – R/A 34W2P D-SUB CONNECTOR

NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD10-0000.
2. MATERIAL SPECIFICATIONS:
SHELLS: COLD ROLLED STEEL PER ASTM A568.
INSULATORS: HIGH TEMPERATURE THERMOPLASTIC.
ALIGNMENT PLATE: HIGH TEMPERATURE THERMOPLASTIC.
SIGNAL CONTACTS: BRASS PER ASTM B16.
BRACKETS: COLD ROLLED STEEL PER ASTM A620.
CLINCH NUTS: BRASS PER ASTM B16.
SNAP IN BOARDLOCKS: COPPER ALLOY.
FOR POWER CONTACT SPECIFICATIONS SEE CONTACT SALES DRAWINGS.
3. FINISH SPECIFICATIONS:
SIGNAL CONTACTS: .000030 MIN. GOLD PER MIL-G-45204 OVER
.000050 MIN. NICKEL PER QQ-N-290.
SNAP IN BOARDLOCKS: TIN PLATED.
ALL OTHER METAL PARTS: YELLOW CHROMATE OVER ZINC PER ASTM B633.
INSULATORS: BLACK.
ALIGNMENT PLATE: BLACK.
FOR POWER CONTACT SPECIFICATIONS SEE CONTACT SALES DRAWINGS.
4. MOTOROLA P/N: 2886655W01 REV D.
222-010-00415G
FIRST MATE/LAST BREAK
222-010-00416G
2 X .300 7.62
.580 14.73
FROM REAR OF D-SUB FLANGE
.450 11.43
FROM REAR OF D-SUB FLANGE
.080 2.03
.100 2.54
.200 5.08
(.370 9.40 )
FROM REAR OF D-SUB FLANGE
4 X R.124 3.15
.606 15.39
.303 7.70
4 X R.104 2.64
32 X .030 .76
2.634 66.90
2.406 61.11
2.077 52.76
.435 11.05
.484 12.29
.236 5.99
.035 .89
2 X .120 3.05
2 X .078 1.98
CATALOG P/N: RM34W2P-1000
A
2 X .810 20.57
REV
DESCRIPTION
BY
DATE
APPD
G
ECR8975
2 X .056 1.42
.163 4.14
.272 6.91
.381 9.68
.489 12.42
.598 15.19
MATING FACE
OF CONNECTOR
2 X 1.203 30.56
.098 2.49
.004[0.10] M A
2 X .870 22.10
2 X .761 19.33
3 X .652 16.56
3 X .544 13.82
3 X .435 11.05
3 X .326 8.28
3 X .218 5.54
4 X .109 2.77
.120 3.05
32 X .045 1.14
.004[0.10] M A
FOOTPRINT
VIEWED FROM COMPONENT
SIDE OF P.C.B.
RECOMMENDED PCB
THICKNESS .063 [1.6]
.570 14.48
.470 11.94
.370 9.40
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX ± .01 [0.3]
.XXX ± .005 [0.13]
.XXXX ± .XXXX
ANGLES: ± 2°
SCALE: 1:1
NORTHROP GRUMMAN
Winchester Electronics ^{62 Barnes Industrial Road North}
Wallingford, CT 06492
CUSTOMER
DRAWING
R/A 34W2P D-SUB CONNECTOR
DRAWN
KJT
APPROVED
JWH
DATE APPROVED
07/12/02 JEM
DATE APPROVED
7/15/02 JED
DATE
7/15/02
B ^DATE
7/15/02
SDRM34W2P-1000 1 ^{1 SHT OF}
REV
G
June 2006 - This drawing became the property of Winchester Electronics Corporation, Wallingford, CT.