831B509 Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – Plugs, Jacks, Adapters

Plugs, Jacks, Adapters
F type plugs are available in three different crimp styles: two piece with separate ferrules, one piece crimp with a short crimp
body and a one piece crimp with a long body. Also, a twist-on type for tool-less installations. Jacks for bulkhead, inline, or PC
board, and a variety of adapters are all machined brass construction.
Part Number
Description
810A209A 2 Piece Crimp Plug, Short Ferrule
810A209D 2 Piece Crimp Plug, Short Ferrule
810A209G 2 Piece Crimp Plug, Short Ferrule
810B209G 2 Piece Crimp Plug, Long Ferrule
810D209A 2 Piece Crimp Plug, Short Ferrule
810A209MV 4 Pc Crimp Mini Coax. Uses BD11007 Tool
810D209D 1 Piece Crimp Plug, Short Ferrule
810D209G 1 Piece Crimp Plug, Short Ferrule
810E209A 1 Piece Crimp Plug, Long Ferrule
810E209D 1 Piece Crimp Plug, Long Ferrule
810E209G 1 Piece Crimp Plug, Long Ferrule
810A409A Twist-On
810A409G Twist-On
810P209A Push-On
810P209G Push-On
816B519 Male Bulkhead Receptacle. 3/8-32 THD I.D.
826B519 Bulkhead Jack, Solder Tab
832A519N Inline Female/Female W/Nut &Washer
830A509 Inline, Male/Male
831B509 Inline Female/Male Push-On
832A519 Inline Female/Female
843A509 “ T” Adapter, Female/Male/Female
845A509 “ T” Adapter, Female/Female/Female
851A509 Right Angle Adapter, Male/Female
F0884
75 Ohm Male Terminator
RG/U Fig.
Cable No.
6 117
11 117
59 117
59 118
6 119
174 117A
11 119
59 119
6 120
11 120
59 120
6 121
59 121
6 122
59 122
Any 130A
Any 123
N/A 124
N/A 125
N/A 125A
N/A 126
N/A 127
N/A 128
N/A 129
N/A 130
Fig. 117
Fig. 117A
Fig. 118
Fig. 119
Fig. 120
Fig. 121
Also See Push-EZ™ Next Page
Fig. 122
Fig. 123
s
Fig. 124
Adapters & Terminators
Fig. 125
Fig. 126
Fig. 125A
Fig. 127
Fig. 128
s
This recessed male acts as a jack & allows for a
replaceable female end by using a 832A519 adapter.
Also, this can be used to accommodate any adapter with
a female F interface on one side. The other end can be
BNC, TNC, or any style available. (See adapter pages)
Fig. 129
Fig. 130
ss
Fig. 130A2
3/8 - 32 Internal Thd. ½ - External Thd.
s
s
_____________________________