1205-103-9 Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – NORTHROP GRUMMAN TYPE N STRAIGHT CABLE PLUG CRIMP ATTACHMENT

1.457 37.02
.686 17.41
REV
DESCRIPTION
BY
DATE
APPD
A
RELEASED
PER ER7520
.460 11.68
.416 10.57
.500 12.70
.298 7.57
NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD60-0000.
MEETS NORTHROP GRUMMAN SPECIFICATION 5NG0026 REV: DRAFT
2. MATERIAL SPECIFICATIONS:
INSULATOR: TEFLON PER ASTM D1710
GASKET: SILICONE RUBBER PER A-A-59588
K-GRIP SLEEVE: BRONZE TUBE ALLOY 220
C-RING & OUTER CONTACT: PHOSPHOR BRONZE PER ASTM B103
ALL OTHER PARTS: BRASS PER ASTM B16
3. FINISH SPECIFICATIONS:
CENTER CONTACT: .000050 MIN GOLD PER ASTM B488 OVER
.000050 MIN NICKEL PER SAE-AMS-QQ-N-290
OUTER CONTACT: .000200 MIN SILVER PER ASTM B700 OVER
.000020 MIN COPPER PER ASTM B734
ALL OTHER METAL PARTS: .000050 MIN NICKEL PER SAE-AMS-QQ-N-290 OVER
.000050 MIN COPPER PER ASTM B734
4. ELECTRICAL SPECIFICATIONS:
NOMINAL IMPEDANCE: 50 OHMS
VOLTAGE RATING: 500 VRMS
FREQUENCY RANGE: DC TO 11 GHz
5. CRIMP FERRULE AND CENTER CONTACT SHIPPED LOOSE.
6. ASSEMBLE TO CABLE USING CP-480
7. CRIMP USING DIE KTH-2294 (.110 HEX CONTACT; .384 HEX FERRULE)
8. DESIGNED FOR USE WITH NORTHROP GRUMMAN 5NG0032 CABLE.
.910 23.11
5/8-24 UNEF-2B
.812±.004 [20.62] HEX
.572 14.53
P/N: 1205-103-9
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .XXXX
ANGLES: ± 2°
SCALE: 2:1
CUSTOMER
DRAWING
DRAWN
HN
APPROVED
WPM
DATE APPROVED
03/06/07 HN
DATE APPROVED
04/14/08 DCAM
DATE
03/02/07
DATE
04/14/08
WincheserElecronics
Winchester Electronics Corporation
®
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
NORTHROP GRUMMAN
TYPE N STRAIGHT CABLE PLUG
CRIMP ATTACHMENT
A
SD1205-103-9
1 1 ^{SHT OF}
REV
A