0345-E00-V3601N Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – DIN 1.0/2.3 75 OHM PLUG FOR ARGOSY IMAGE 360 CABLE (RoHS COMPLIANT)

NOTES: UNLESS OTHERWISE SPECIFIED
1. DESIGNED FOR USE WITH ARGOSY IMAGE 360 & BELDEN 1855ENH CABLE OR EQUIVALENT.
2. MATERIAL SPECIFICATIONS:
BODY & CENTER CONTACT: BRASS PER ASTM B16.
OUTER CONTACT & FERRULE: COPPER ALLOY.
INSULATOR: TEFLON PER ASTM D1710.
3. FINISH SPECIFICATIONS:
BODY & FERRULE: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS).
CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS).
4. ELECTRICAL SPECIFICATIONS:
IMPEDANCE: 75 OHMS.
FREQUENCY RANGE: DC-6.0 GHz.
RETURN LOSS: <-20dB UP TO 3.0 GHz, <-15dB UP TO 6.0 GHz.
5. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD.
6. CONTACT AND FERRULE SHIPPED LOOSE.
7. INTERFACE PER CECC 22230.
8. CRIMP FERRULE (.213 HEX) AND CONTACT (.042 HEX) USE KINGS KTH-2113.
9. CAP-E03.
REV
DESCRIPTION
BY
DATE
APPD
G
REVISED PER
ECR-ER36094
P/N
DESCRIPTION
QTY
0345-E00-V3601N
SINGLE PACK
1
0345-E00-V3601NU
BULK PACK
400
.245 6.22
.315 8.00
.206 5.23
DMF026 B
.500 12.70
.032 .81
.128 3.25
1.29 [32.8]
WHEN ASSEMBLED
.625 15.88
.327 8.31
.150 3.81
RECOMMENDED CABLE TRIM DIMENSIONS
CATALOG P/N: 0345-E00-V3601N
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .XXXX
ANGLES: ± 2°
SCALE: 2:1
CUSTOMER
THIRD
ANGLE
SALES DRAWING
DRAWN
DW
APPROVED
WPM
DATE APPROVED
06/16/09 Dcam
DATE APPROVED
09/16/09 XXX
DATE
09/16/09
DATE
XX/XX/XX
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
DIN 1.0/2.3 75 OHM PLUG
FOR ARGOSY IMAGE 360 CABLE
(RoHS COMPLIANT)
A
SD0345-E00-V3601N
SHT OF _REV
11G