0345-E00-C7201N Datasheet, PDF (1/1 Pages) Winchester Electronics Corporation – DIN 1.0/2.3 75 OHM PLUG FOR BELDEN 1855A CABLE

NOTES: UNLESS OTHERWISE SPECIFIED
1. DESIGNED FOR USE WITH BELDEN 1855A, GEPCO VDM230 OR EQUIVALENT CABLE.
2. MATERIAL SPECIFICATIONS:
BODY: BRASS PER ASTM B16.
CENTER CONTACT: COPPER ALLOY.
OUTER CONTACT: COPPER ALLOY.
INSULATOR: TEFLON PER ASTM D1710.
FERRULE: BRONZE C22000.
3. FINISH SPECIFICATIONS:
BODY: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS).
CENTER CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS).
OUTER CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS).
FERRULE: .000050 MIN NICKEL PER AMS-QQ-N-290 OVER .000050 MIN COPPER FLASH PER ASTM B734 (RoHS).
4. STRIP USE KINGS KTS-8-2.
5. CRIMP FERRULE USE KINGS KTH-1000 & KTH-2025(.178 HEX).
6. INTERFACE PER CECC 22230.
7. CAP-E02.
8. ELECTRICAL SPECIFICATIONS:
IMPEDANCE: 75 OHMS.
FREQUENCY RANGE: DC-6.0 GHz.
RETURN LOSS: <-20dB UP TO 3.0 GHz, <-15dB UP TO 6.0 GHz.
9. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD.
.215 5.46
.184 4.67
REV
DESCRIPTION
BY
DATE
APPD
F
REVISED PER
ER041839
P/N
DESCRIPTION
QTY
0345-E00-C7201N
SINGLE PACK
1
0345-E00-C7201NU
BULK PACK
400
.315 8.00
.500 12.70
.624 15.85
.312 7.92
.105 2.67
1.287 [32.69]
WHEN ASSEMBLED
.155 3.94
.005 MIN
CHAMFER
RECOMMENDED CABLE TRIM DIMENSIONS
.462 11.73
TO TIP OF CABLE INNER CONDUCTOR
CATALOG P/N: 0345-E00-C7201N
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .XXXX
ANGLES: ± 2°
SCALE: 4:1
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
CUSTOMER
DRAWING
DRAWN
DW
APPROVED
XXX
DATE APPROVED
05/22/08 DCam
DATE APPROVED
XX/XX/XX XXX
DIN 1.0/2.3 75 OHM PLUG
FOR BELDEN 1855A CABLE
DATE
(RoHS COMPLIANT)
05/28/08
REV
A 1 1 F ^DATE
XX/XX/XX
SD0345-E00-C7201N SHT OF