W25Q32DW_12 Datasheet, PDF (72/82 Pages) Winbond – 1.8V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q32DW
11.6 AC Electrical Characteristics
DESCRIPTION
SYMBOL
Clock frequency for SPI Read data instructions
(03h)
Clock frequency for SPI Quad Read instructions
(6Bh,EBh,E7h,E3h)
Clock frequency for QPI Read instructions(0Bh,
EBh,0Ch) with 2/4/6/8 dummy clocks
Clock frequency for QPI Read instructions(0Bh,
EBh,0Ch) with 2/4/6/8 dummy clocks, A<1:0>=0,0
Clock frequency for all other SPI/QPI instructions
Clock High, Low Time
for all instructions except for Read Data (03h)
Clock High, Low Time
for Read Data (03h) instruction
Clock Rise Time peak to peak
Clock Fall Time peak to peak
/CS Active Setup Time relative to CLK
/CS Not Active Hold Time relative to CLK
Data In Setup Time
Data In Hold Time
/CS Active Hold Time relative to CLK
/CS Not Active Setup Time relative to CLK
/CS Deselect Time (for Array Read Æ Array
Read)
/CS Deselect Time (for Erase or Program Æ Read
Status Registers)
Volatile Status Register Write Time
Output Disable Time
Clock Low to Output Valid
Clock Low to Output Valid (for Read ID
instructions)
Output Hold Time
/HOLD Active Setup Time relative to CLK
fR
FR
FR
FR
FR
tCLH,
tCLL⁽¹⁾
tCRLH,
tCRLL⁽¹⁾
tCLCH⁽²⁾
tCHCL⁽²⁾
tSLCH
tCHSL
tDVCH
tCHDX
tCHSH
tSHCH
tSHSL1
tSHSL2
tSHQZ⁽²⁾
tCLQV1
tCLQV2
tCLQX
tHLCH
SPEC
ALT
MIN TYP
MAX
D.C.
50
UNIT
MHz
f_C1 D.C.
f_C1 D.C.
80
30/50/80/104
MHz
MHz
f_C1 D.C.
30/80/104/104 MHz
f_C1 D.C.
4
8
8
0.1
0.1
tCSS 5
5
tDSU 2
tDH 3
5
5
tCSH 10
tCSH 50
50
tDIS
tV1
tV2
tHO 0
5
104
MHz
ns
ns
V/ns
V/ns
ns
ns
ns
ns
ns
ns
ns
ns
7
ns
7
ns
7.5
ns
ns
ns
Continued – next page
- 72 -