W27L010 Datasheet, PDF (4/14 Pages) Winbond – 128K ´ 8 ELECTRICALLY ERASABLE EPROM

Preliminary W27L010
DC CHARACTERISTICS
Absolute Maximum Ratings
PARAMETER
RATING
UNIT
Operation Temperature
0 to +70
°C
Storage Temperature
-65 to +125
°C
Voltage on all Pins with Respect to Ground Except VCC, VPP
-0.5 to VCC +0.5
V
and A9 Pins
Voltage on VCC Pin with Respect to Ground
-0.5 to +7
V
Voltage on VPP Pin with Respect to Ground
-0.5 to +14.5
V
Voltage on A9 Pin with Respect to Ground
-0.5 to +14.5
V
Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings may adversely affect the life and reliability of the
device.
DC Erase Characteristics
(TA = 25° C ±5° C, VCC = 5.0V ±10%, VHH = 14V)
PARAMETER
SYM.
CONDITIONS
LIMITS
UNIT
MIN. TYP. MAX.
Input Load Current
ILI
VIN = VIL or VIH
-10
-
10 µA
VCC Erase Current
ICP
CE = VIL, OE = VIH,
-
-
30 mA
PGM = VIL, A9 = VHH
VPP Erase Current
IPP
CE = VIL, OE = VIH,
-
-
30 mA
PGM = VIL, A9 = VHH
Input Low Voltage
VIL
-
-0.3
-
0.8 V
Input High Voltage
VIH
-
2.4
-
5.5 V
Output Low Voltage (Verify) VOL IOL = 2.1 mA
-
-
0.45 V
Output High Voltage (Verify) VOH IOH = -0.4 mA
2.4
-
-
V
A9 Erase Voltage
VID
-
13.25 14.0 14.25 V
VPP Erase Voltage
VPE
-
13.25 14.0 14.25 V
VCC Supply Voltage (Erase) VCE
-
4.5 5.0 5.5 V
Note: VCC must be applied simultaneously or before VPP and removed simultaneously or after VPP.
-4-