W25X16A Datasheet, PDF (33/48 Pages) Winbond – 16M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI

W25X16A
13 ELECTRICAL CHARACTERISTICS
13.1 Absolute Maximum Ratings ⁽¹⁾
PARAMETERS
Supply Voltage
Voltage applied to any Pin
Transient Voltage on any Pin
Storage Temperature
Lead Temperature
Electrostatic Discharge Voltage
SYMBOL
VCC
VIO
VIOT
TSTG
TLEAD
VESD
CONDITIONS
Relative to Ground
<20nS Transient
Relative to Ground
Human Body Model⁽³⁾
RANGE
–0.6 to +4.0
–0.6 to VCC +0.4
UNIT
V
V
–2.0V to VCC+2.0V V
–65 to +150
°C
See Note ⁽²⁾
°C
–2000 to +2000
V
Notes:
1. This device has been designed and tested for the specified operation ranges. Proper operation
outside of these levels is not guaranteed. Exposure to absolute maximum ratings may affect device
reliability. Exposure beyond absolute maximum ratings may cause permanent damage.
2. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly
and the European directive on restrictions on hazardous substances (RoHS) 2002/95/EU.
3. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 ohms, R2=500 ohms).
13.2 Operating Ranges
PARAMETER
SYMBOL CONDITIONS
Supply Voltage
Ambient Temperature,
Operating
VCC
TA
F_R0 = 75MHz, fR = 50MHz
F_R1 = 100MHz, fR = 50MHz
Industrial
Commercial⁽¹⁾
SPEC
MIN
MAX
2.7
3.6
3.0
3.6
–40
+85
0
+70
UNIT
V
°C
Note:
1. Commercial temperature only applies to Fast Read (F_R1) and 100K cycles endurance for 4K byte
sectors . Industrial temperature applies to all other parameters.
- 33 -
Publication Release Date: August 7, 2009
Revision B