W25X32A Datasheet, PDF (31/45 Pages) Winbond – 32M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI

W25X32A
11 ELECTRICAL CHARACTERISTICS⁽¹⁾
11.1 Absolute Maximum Ratings ⁽²⁾
PARAMETERS
Supply Voltage
Voltage applied to any Pin
Transient Voltage on any Pin
Storage Temperature
Lead Temperature
Electrostatic Discharge Voltage
SYMBOL
VCC
VIO
VIOT
TSTG
TLEAD
VESD
CONDITIONS
Relative to Ground
<20nS Transient
Relative to Ground
Human Body Model⁽⁴⁾
RANGE
–0.6 to +4.0
–0.6 to VCC +0.4
UNIT
V
V
–2.0V to VCC+2.0V V
–65 to +150
°C
See Note ⁽³⁾
°C
–2000 to +2000
V
Notes:
1. Specification for W25X32A is preliminary. See preliminary designation at the end of this document.
2. This device has been designed and tested for the specified operation ranges. Proper operation outside
of these levels is not guaranteed. Exposure to absolute maximum ratings may affect device reliability.
Exposure beyond absolute maximum ratings may cause permanent damage.
3. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and
the European directive on restrictions on hazardous substances (RoHS) 2002/95/EU.
4. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 ohms, R2=500 ohms).
11.2 Operating Ranges
PARAMETER
SYMBOL CONDITIONS
Supply Voltage
Ambient Temperature,
Operating
VCC
TA
F_R0 = 75MHz, fR = 33MHz
Industrial
SPEC
MIN
MAX
2.7
3.6
–40
+85
UNIT
V
°C
- 31 -
Publication Release Date: August 7, 2009
Preliminary - Revision B