W39V040FA Datasheet, PDF (23/36 Pages) Winbond – 512K X 8 CMOS FLASH MEMORY WITH FWH INERFACE

W39V040FA
10. FWH INTERFACE MODE AC CHARACTERISTICS
AC Test Conditions
PARAMETER
Input Pulse Levels
Input Rise/Fall Slew Rate
Input/Output Timing Level
Output Load
CONDITIONS
0.6 VDD to 0.2 VDD
1 V/nS
0.4VDD / 0.4VDD
1 TTL Gate and CL = 10 pF
Read/Write Cycle Timing Parameters
(VDD = 3.3V ± 0.3V, VSS = 0V, TA = 0 to 70° C)
PARAMETER
Clock Cycle Time
Input Set Up Time
Input Hold Time
Clock to Data Valid
SYMBOL
TCYC
TSU
THD
TKQ
W39V040FA
MIN.
MAX.
30
-
7
-
0
-
2
11
Note: Minimum and Maximum time has different loads. Please refer to PCI specification.
UNIT
nS
nS
nS
nS
Reset Timing Parameters
PARAMETER
VDD stable to Reset Active
Clock Stable to Reset Active
Reset Pulse Width
Reset Active to Output Float
Reset Inactive to Input Active
SYMBOL
TPRST
TKRST
TRSTP
TRSTF
TRST
MIN.
1
100
100
-
10
TYP.
-
-
-
-
-
MAX.
-
-
-
50
-
Note: All AC timing signals observe the following guidelines for determining setup and hold times:
(a) High level signal's reference level is input high and (b) low level signal's reference level is input low.
Ref. to the AC testing condition.
UNIT
mS
µS
nS
nS
µS
- 23 -
Publication Release Date: December 19, 2002
Revision A2