ISD-ES501 Datasheet, PDF (2/5 Pages) Winbond – ISD-ES501 Evaluation System

DESCRIPTION:
This demo board allows the complete operation of the ISD5008 IC controlled through the parallel port of a
PC. All the functions of the chip may be selected in real time to allow complete evaluation of this chip for
an end application. The PC connects to the demo using a standard parallel cable from LPT1.
This board is designed to be used with software (Copyright © 1999 National Instruments Corporation. All
Rights Reserved) supplied by ISD. The software is supplied free of charge with the demo on a CD
DEVICE SUPPORTED:
Product supported
ISD5008 Series
Ordering Code
ISD-ES501
SYSTEMS REQUIREMENT:
Window 2000 or later
PC with Parallel Printer port.
CONTENTS OF KIT:
− One CD (Application Software and user’s guide)
− ISD-ES501 Evaluation board
− One ISD5008 P-Dip Sample
SET-UP CONNECTIONS:
The PC connects to the demo using a standard parallel cable from LPT1.
This board is designed to be used with software (Copyright © 1999 National Instruments Corporation. All
Rights Reserved) supplied by ISD. The software is supplied free of charge with the demo on A CD.
The software paints a block diagram of the major components of the chip on the screen and the possible
paths between them. When a path is selected, it lights up in yellow.
Extract these files to a temporary directory and run Setup.exe. It will go through a normal Windows
installation process. You will end up with an icon on your desktop that starts the demo hardware.
Es501m.doc is a Microsoft Word copy of these instructions.
SOFTWARE:
The software paints a block diagram of the major components of the chip on the screen and the possible
paths between them. When a path is selected, it lights up in yellow. Note that a path can be “possible”
into an element but not selected by that element. Pointing the mouse to the white area to the left of each
box and clicking on the desired change control the major elements of the ISD5008. This is the same area
where the check marks appear. These controls set up paths or amplifier gains in the selected element.
[Note that on some computers with small monitors or different video drivers the full contents of each
white box will NOT be displayed. It will be necessary to click on the box and then use your "up" and
"down" arrow keys to view and select all possible conditions. Otherwise, the software still works the
same.]
ISD-ES501.PDF
02/10/06