|
W91F820N Datasheet, PDF (1/20 Pages) Winbond – 13-FLASH MEMORY TONE/PULSE DIALER WITH HANDFREE, LOCK AND HOLD FUNCTIONS | |||
|
Preliminary W91F820N SERIES
13-FLASH MEMORY TON/PULSE DIALER WITH
HANDFREE, LOCK AND HOLD FUNCTIONS
GENERAL DESCRIPTION
The W91F820N is a series of tone/pulse switchable telephone dialers with 13-flash memory, keytone,
hold, lock, and handfree dialing control features. These chips are fabricated using Winbond's high-
performance CMOS technology and thus offer good performance in low-voltage, low-power
operations.
FEATURES
⢠Tone/pulse switchable dialer
⢠Two by 32 digits redial and save memory
⢠Three by 32 digits one-touch direct repertory flash memory
⢠Ten by 32 digits one-touch direct or two-touch indirect repertory flash memory
⢠The read-write times: 104
⢠Pulse-to-tone (*/T) keypad for long distance call operation
⢠Chain dialing
⢠Uses 5 à 5 keyboard
⢠Easy operation with redial, flash, pause, and */T keypads
⢠Pause, PâT (pulse-to-tone) can be stored as a digit in memory
⢠Dialing rate:10 ppS or 20 pps by mask option
⢠Minimum tone output duration: 93 mS
⢠Minimum intertone pause: 93 mS
⢠Pause time: 3.6 sec.
⢠Flash break time (73 mS, 100 mS, 300 mS, or 600 mS) selectable by keypad; pause time is 1.0 S
⢠Make/break ratio (2:3 or 1:2) selectable by MODE pin
⢠Mute key for speech network mute
⢠No key will be accepted except the "HOLD" key when in the Hold mode
⢠Key tone output for valid keypad entry recognition
⢠On-chip power-on reset
⢠Uses 3.579545 MHz crystal or ceramic resonator
⢠20-pin 300 mil, or 22-pin 400 mil dual-in-line plastic package
⢠The different dialers in the W91F820N series are shown in the following table:
TYPE NO.
W91F820N
W91F820AN
W91F820LN
W91F820ALN
W91F822N
W91F822AN
PULSE
(PPS)
10
10
10
10
20
20
LOCK
-
-
â
â
-
-
KEY
TONE
â
â
-
-
â
â
HANDFREE
DIALING
-
â
-
â
-
â
PACKAGE
(PINS)
20
22
20
22
20
22
Publication Release Date: January 1999
-1-
Revision A1
|
▷ |