CXL25GP1 Datasheet, PDF (1/2 Pages) Willow Technologies Ltd – High Performance, 1-Axis and 3-Axis Accelerometers

CXL-GP Series
General Purpose ACCELEROMETER
RoHS
COMPLIANT
• High Performance, 1-Axis
and 3-Axis Accelerometers
• Small, Low-Cost
• Reliable Packaging with
Screw-Down Mounting
• Factory Calibrated
Applications
• Automotive Testing
• Instrumentation
• Equipment Monitoring
GP Series
The GP Series accelerometers are low
cost, general purpose, linear accelera-
tion and/or vibration sensors available
in ranges of ±4g, ±10g, and ±25g.
Common applications are automo-
tive testing, instrumentation, and
equipment monitoring. The GP Series
sensing element is a silicon micro-ma-
chined capacitive beam. The capacitive
beam is held in forcebalance for full
scale non-linearity of less than 0.2%.
The GP Series offers wide dynamic
range, has excellent frequency
response, operates on a single 4.9 to
5.5 VDC power supply, and is easy to
interface to standard data acquisition
systems. The 3-axis version (GP3) can
be specified with an internal regulator
(-R option) for use with a5.5 to 36 V
unregulated power supply.
The GP Series sensors provide a direct
high-level analog voltage output.
The output requires no external
signal conditioning electronics and
may be directly interfaced to an A/D
or other data acquisition hardware.
Compared to traditional piezoelec-
tric and piezoresistive accelerometer
technologies, the silicon micromachined
sensors offer equivalent performance
at a significantly lower cost.
The GP Series is offered with a standard
5-pin female connector. The highly
flexible, low-mass cable prevents
disruption of the measurement.
Standard Package Dimensions
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
www.memsic.com