M1 Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER

WILLAS
SURFACE MOUNT SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
M1
THRU
M7
FEATURES
* ^{Ideal for surface mounted applications}
* ^{Low leakage current}
* ^{Metallurgically bonded construction}
* Mounting position : Any
* Weight : 0.066 grams
* RoHS product for packing code suffix "G"
Halogen free product for packing code suffix "H"
SMA-P(DO-214AC)
.075(1.90)
.043(1.10)
.181(4.60)
.160(4.06)
.112(2.79)
.096(2.45)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.059(1.52)
.030(0.76)
.091(2.31)
.067(1.70)
.010 Max.
(0.25)
.208(5.30)
.188(4.80)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS / MARKING CODE
SYMBOL
M1
M2
M3
M4
M5
M6
M7 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800 1000 Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at TA = 75^oC
VDC
50
100
200
400
600
800 1000 Volts
IO
1.0
Amps
Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave
IFSM
superimposed on rated load (JEDEC method)
30
Amps
Maximum Thermal Resistance
(Note 2) RθJL
30
0_{C/ W}
(Note 3) RθJA
70
0_{C/ W}
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
CJ
TJ, TSTG
15
pF
-65 to + 175
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
M1
M2
M3
M4
M5
M6
M7 UNITS
Maximum Forward Voltage at 1.0A DC
VF
1.1
Volts
Maximum Full Load Reverse Current,
Full cycle Average at TA=75^oC
Maximum DC Average Reverse Current at
@TA = 25^oC
IR
Rated DC Blocking Voltage
@TA = 125^oC
30
uAmps
5.0
uAmps
50
uAmps
NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC
2. Thermal resistance junction to terminal 6.0mm² coppeer pads to each terminal.
3. Thermal resistance junction to ambient, 6.0mm² coppeer pads to each terminal.