KBP2005G Datasheet, PDF (1/2 Pages) Diodes Incorporated – 2.0A GLASS PASSIVATED BRIDGE RECTIFIER

WILLAS
2.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER - 50V-1000V
KBP PACKAGE
KBP2005G
THRU
KBP210G
FEATURES
* Ideal for printed circuit board
* Surge overload rating: 55 Amperes peak
* Mounting position: Any
* Weight: Approximated 1.5 grams
* RoHS product for packing code suffix "G"
Halogen free product for packing code suffix "H"
* ^{Moisture Sensitivity Level 1}
MECHANICAL DATA
* UL listed the recognized component directory, file #E195711
* Epoxy: Device has UL flammability classification 94V-O
C.111(2.8)
.581(14.75)
.561(14.25)
.057(1.45)
.045(1.15)
~~
.060(1.52)
.031(0.80)
.441(11.2)
.397(10.1)
.161(4.10)
.131(3.35)
.034(0.86)
.026(0.66)
.557(14.15)MIN. _.026(0.65)
.011(0.30)
.160(4.06)
.140(3.56)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
RATINGS
Marking Code
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
SYMBOL KBP2005G KBP201G
KBP2005G KBP201G
VRRM
50
100
VRMS
50
70
VDC
50
100
KBP202G
KBP202G
200
140
200
KBP204G KBP206G KBP208G KBP210G
KBP204G KBP206G KBP208G KBP210G
400
600
800
1000
280
420
560
700
400
600
800
1000
UNIT
Volts
Volts
Volts
Maximum Average Forward Rectified Current
IO
2.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
IFSM
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 2)
RΘJA/RΘJL
Typical Junction Capacitance (Note 1)
CJ
Operating Temperature Range
TJ
Storage Temperature Range
TSTG
55
32 / 13
25
-55 to +150
-55 to +150
Amps
℃/W
PF
℃
℃
CHARACTERISTICS
Maximum Forward Voltage at 2.0A DC
Maximum Average Reverse Current at
Rated DC Blocking Voltage
@TC=25℃
@TC=100℃
SYMBOL KBP2005G
VF
IR
KBP201G
KBP202G
KBP204G KBP206G KBP208G KBP210G
1.1
5.0
500
UNIT
Volts
μAmps
NOTES :1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B with 0.47 x 0.47"(12 x 12mm)copper pads.
2012-06
WILLAS ELECTRONIC CORP.