627T Datasheet, PDF (1/4 Pages) Bi technologies – CCITT V.35 Termination Surface Mount Resistor Networks

Resistors
Model 627 T
Model 627 T Series
CITT V.35 Termination
Surface Mount Resistor Networks
Make Possible
Electrical
Standard Resistance Tolerance, at 25°C
Operating Temperature Range
Temperature Coefficient of Resistance
Temperature Coefficient of Resistance Tracking
Voltage Coefficient of Resistance
Maximum Operating Voltage
Insulation Resistance
Environmental
Thermal Shock plus Power Conditioning
Short Time Overload
Moisture Resistance
Mechanical Shock
Vibration Shock
Low Temperature Operation
High Temperature Exposure
Load Life, 2,000 Hours (≤33 Ohms = ±0.5 Ohm)
Resistance to Solder Heat (Total immersion in solder at 280°C for 10 sec.)
Dielectric Withstanding Voltage
Temperature Exposure, Maximum
Marking Permanency
Lead Solderability
Flammability
Storage Temperature Range
All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2)
±2%
-55°C to +125°C
±250ppm/°C
±50ppm/°C
±100ppm/°C
25Vdc
≥10,000 Megohms
ΔR 0.70%
ΔR 0.25%
ΔR 0.50%
ΔR 0.25%
ΔR 0.25%
ΔR 0.25%
ΔR 0.50%
ΔR 0.50%
ΔR 0.25%
200V for 1 minute
215°C for 3 minutes
MIL-STD-202, Method 215
MIL-STD-202, Method 208
UL-94V-O Rated
-55°C to +150°C
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
07.14