0212840000 Datasheet, PDF (1/4 Pages) Weidmuller – Feed-through terminal, 6 mm², Screw connection, PA 66, TS 35 + TS 32

Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 / TS 35 EN combination foot
| Modular feed-through terminals
General ordering data
Order No.
Part designation
Version
EAN
Qty.
Product notes
Note, ordering data
Note, technical data
Note, accessories
PT OKIECEx/ATEX rating data
EU-type examination certificate
IECEx Certificate of Conformity
ATEX voltage
ATEX current
ATEX conductor cross-section
IECEx voltage
IECEx current
IECEx conductor cross-section
Marking EN 60079-7
Marking ATEX Directive 94/9/EC
Additional technical data
Connection direction
End plate required
Explosion-tested version "Ex e"
Installation advice
Insulating material
Levels cross-connected internally
No. of levels
Operating temperature range
Type of connection
UL 94 flammability rating of insulation material
Version
CSA rating data
Voltage (CSA)
CSA current
Min. cross-section (CSA)
Max. cross-section (CSA)
Conductors for clamping (rated connection)
Clamping range, min.
Clamping range, max.
Type of connection
0212840000
SAK 6/EN RT
Feed-through terminal, 6 mm², Screw connection,
PA 66, TS 35 + TS 32
4008190205928
100 pc(s).
With AWG 6 and H07V-R10 conductors, an
increased MD torque of 1.4 to1.6 Nm should be
used.
For AWG 8-7 and AWG 8-19, tightening torque is
1.21.4 Nm
When used with twin ferrules ZH 0.5 - ZH 4, the
rated voltage is 690 V.
KEMA97ATEX1798U
IECEXKEM06.0014U
690 V
36 A
6 mm²
690 V
36 A
6 mm²
Ex e II
Ex II 2 G D
on side
Yes
No
TS 35 + TS 32
PA 66
No
1
- 50 °C, + 100 °C
Screwed
V2
Feed-through terminal
600 V
47 A
AWG 26
AWG 6
0.33 mm²
10 mm²
Screw connection
-1-