W3DG6433V-D2 Datasheet, PDF (3/5 Pages) White Electronic Designs Corporation – 256MB- 32Mx64 SDRAM UNBUFFERED

White Electronic Designs
W3DG6433V-D2
ABSOLUTE MAXIMUM RATINGS
Parameter
Voltage on any pin relative to VSS
Voltage on VCC supply relative to VSS
Storage Temperature
Power Dissipation
Short Circuit Current
Symbol
VIN, VOUT
VCC, VCCQ
TSTG
PD
IOS
Value
-1.0 ~ 4.6
-1.0 ~ 4.6
-55 ~ +150
4
50
Units
V
V
°C
W
mA
Note:
Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded.
Functional operation should be restricted to recommended operating condition.
Exposure to higher than recommended voltage for extended periods of time could affect
device reliability.
RECOMMENDED DC OPERATING CONDITIONS
(Voltage Referenced to: VSS = 0V, 0°C ≤ TA ≤ 70°C)
Parameter
Symbol Min Typ
Max Unit
Note
Supply Voltage
Input High Voltage
Input Low Voltage
VCC
3.0 3.3
3.6
V
VIH
2.0 3.0 VCCQ+0.3 V
1
VIL
-0.3 —
0.8
V
2
Output High Voltage
VOH
2.4
—
Output Low Voltage
VOL
—
—
Input Leakage Current
ILI
-10 —
—
V IOH= -2mA
0.4
V IOL= -2mA
10
µA
3
Note:
1. VIH (max)= 5.6V AC. The overshoot voltage duration is ≤ 3ns.
2. VIL (min)= -2.0V AC. The undershoot voltage duration is ≤ 3ns.
3. Any input 0V ≤ VIN ≤ VCCQ
Input leakage currents include Hi-Z output leakage for all bi-directional buffers with Tri-State
outputs.
CAPACITANCE
(TA = 23°C, F = 1MHZ, VCC = 3.3V, VREF = 1.4V 6200MV)
Parameter
Symbol Max Unit
Input Capacitance (A0-A12)
CIN1
25 pF
Input Capacitance (RAS#,CAS#,WE#)
CIN2
25 pF
Input Capacitance (CKE0)
CIN3
25 pF
Input Capacitance (CK0,CK2)
CIN4
13 pF
Input Capacitance (CS0#,CS2#)
CIN5
15 pF
Input Capacitance (DQM0-DQM7)
CIN6
10 pF
Input Capacitance (BA0-BA1)
CIN7
25 pF
Data input/output capacitance (DQ0-DQ63) COUT 12 pF
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
June, 2003
Rev.1
3
White Electronic Designs Corporation • [phone] • www.wedc.com