|
ENH050QA1-320 Datasheet, PDF (1/21 Pages) White Electronic Designs Corporation – ENH050QA1-320/450/600 Color TFT-LCD Module Features | |||
|
White Electronic Designs
Display Systems Division
ENH050QA1-320/450/600
ENH050QA1-320/450/600 Color TFT-LCD Module Features
GENERAL DESCRIPTION
Slim, lightweight and compact
WEDC provides optically enhanced solutions to the
standard Sharp LQ5AW136 color active matrix LCD
module. The ï¬rst enhancement is an index matching
(IM) ï¬lm lamination to the front surface of the display
polarizer.
The IM ï¬lm is available in two surface treatments - IM/Clear
and IM/110 (a 10% diffusion).The second enhancement is
the incorporation of a reï¬ective polarizer (RP) to improve
brightness by up to 40%. The third enhancement is
the addition of prism ï¬lms (RPp) further increasing the
brightness of the display. The module accepts full color
video signals conforming to the NTSC(M) and PAL(G-B)
system standards.
It can withstand an intense environment, the online
dimension is suitable for an automotive display, compact
size, compatible with 2DIN size.
WEDC assumes no responsibility for any damage resulting
from the use of the device which does not comply with
the instructions and the precautions speciï¬ed in these
speciï¬cation sheets. WEDC does assume the responsibility
for the warranty of the enhanced product.
FEATURES
Dual mode type. [NTSC(M) and PAL(B-G)
standards]
1. Active area/Outline area=70%
2. Thickness: 16.5mm
3. Mass: 200g (Max)
Built-in video interface circuit and control circuit
responsive to two sets of standard RGB analog
video signals.
Reduced reï¬eciton as a resuld of low reï¬ectance
Black-Matrix and Index Matching (IM) ï¬lm
lamination. IM is available in two surface
treatments, IM/Clear (glossy) and IM/110 (10%
diffusion).
It is possible to use both the simultaneous and the
independent time sampling.
An external clock mode is available.
Optical viewing angle: wide view angle (6 o'clock
direction.) (Customer can use this module as a 12
o'clock viewing direction type by using a display
rotating function to rotate right/left and up/down
scanning direction electrically.)
This module includes a high luminance edge light
that is excellent at low temperature.
It is possible to use the dimming frequency (PWM)
for backlight.
MBK-PAL enables the 234-scanning lines panel to
CONSTRUCTION AND OUTLINE
display a picture with virtually 273-scanning lines.
TFT-active matrix-LCD drive system with high
contrast.
Outline dimensions of TFT-LCD module: See Fig. 3
The module consists of a TFT-LCD panel, driver
IC's control PWB mounted with electronic circuits,
74,800 pixels (RBG Stripe conï¬gurations and full
edge light, frame, front and rear shielding cases.
color) 5" diagonal size.
(Backlight driving DC/AC inverter is not built in the
module.)
MECHANICAL SPECIFICATIONS
Parameter
Display Format
Active Area
Screen Size (Diagonal)
Dot Pitch
Dot Conï¬guration
Outline Dimension (1)
Mass
Speciï¬cations
74,800
960 (W) x RGB x 234 (H)
102.2 (W) x 74.8 (H)
13 (5")
0.1065 (W) x 0.3195 (H)
RGB Stripe conï¬guration
126.8 (W) x 89.6 (H) x 16.5 (D)
200 (Max)
Units
pixels
dots
mm
cm
mm
-
mm
g
Note: This measurement is typical, and see Fig. 3 for details.
White Electronic Designs Corp. reserves the right to change products or speciï¬cations without notice.
Original speciï¬cations created by Sharp.
January 2006
Rev. 1
1
Display Systems Division ⢠Hillsboro, OR ⢠(503) 690-2460 ⢠www.wedc.com
|
▷ |