EDI7F4331MC Datasheet, PDF (1/4 Pages) White Electronic Designs Corporation – 4x1Mx32 FLASH MODULE

White Electronic Designs
EDI7F4331MC
4x1Mx32 FLASH MODULE
FEATURES
n 4x1Mx32
n Based on AMD - AM29F080 Flash Device
n Fast Read Access Time - 80ns
n 5V Only Reprogramming
n Sector Erase Architecture
n Uniform sectors of 64 Kbytes each
n Any combination of sectors can be erased
n Also supports full chip erase
n Sector Protection
n Hardware method that disables any
combination of sectors from write or erase
operations
n Embedded Erase Algorithms
n Automatically pre-programs and erases the
chip or any combination of sectors
n Embedded Program Algorithms
n Automatically programs and verifies data at
specified address
n Data Polling and Toggle Bit feature for detection of
program or erase cycle completion
n Low Power Dissipation
n 60mA per Device Active Current
n 10µA per Device CMOS Standby Current
n Typical Endurance >100,000 Cycles
n Single 5V ±10% Supply
n CMOS and TTL Compatible Inputs and Outputs
n Commercial and Industrial Temperature Range
n Package
n 80 Pin SIMM (JEDEC)
DESCRIPTION
The EDI7F4331MC is organized as four banks of 1Mx32.
The module is based on AMDs AM29F080 - 1Mx8 Flash
device in TSOP packages which are mounted on an FR4
substrate.
The module offers access times between 80 and 150ns
allowing for operation of high-speed microprocessors
without wait states.
*This product is subject to change without notice.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Sept. 2002 Rev. 1A
1
White Electronic Designs Corporation • [phone] • www.wedc.com