EDI7F332MC Datasheet, PDF (1/3 Pages) White Electronic Designs Corporation – 2Mx32 FLASH MODULE

White Electronic Designs
EDI7F332MC
2Mx32 FLASH MODULE
DESCRIPTION
The EDI7F332MC and EDI7F2332MC are organized as one
and two banks of 2Mx32 respectively. The modules are based
on AMDs AM29F016 - 2Mx8 Flash device in TSOP packages
which are mounted on a FR4 substrate.
Both modules offer access times between 90 and 150ns
allowing for operation of high-speed microprocessors without
wait states.
FEATURES
n 2Mx32 and 2x2Mx32 Densities
n Based on AMD - AM29F016 Flash Device
n Fast Read Access Time - 90ns
n 5V-Only Reprogamming
n Sector Erase Architecture
n Uniform sectors of 64 Kbytes each
n Any combination of sectors can be erased
n Also supports full chip erase
n Sector Protection
n Hardware method that disables any
combination of sectors from write or erase
operations
n Embedded Erase Algorithms
n Automatically preprograms and erase the chip
or any combination of sectors
n Embedded Program Algorithms
n Automatically programs and verifies data at
specified address
n Data Polling and Toggle Bit feature for detection of
program or erase cycle completion
n Low Power Dissipation
n 60mA per Device Active Current
n 10µA per Device CMOS Standby Current
n Typical Endurance > 100,000 Cycles
n Single 5V ± 10% Supply
n CMOS and tTL Compatable Inputs and Outputs
n Commercial and Industrial Temperature Range
n Package
n 80 Pin SIMM (JEDEC)
FIG. 1
BLOCK DIAGRAMS
EDI7F322MC-BNC: 2Mx32 80 PIN SIMM
���
������
��
���
���
���
���
���� �������
���� ��������
���� ���������
���� ���������
EDI7F2322MC-BNC: 2x2Mx32 80 PIN SIMM
���
���
������
��
���
���
���
���
����
����
����
����
���� _{�������}
���� _{��������}
���� _{���������}
���� _{���������}
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Sept. 2002
Rev. 4A
1
White Electronic Designs Corporation • [phone] • www.wedc.com