DCHBW200 Datasheet, PDF (9/10 Pages) Wall Industries,Inc. – 165 - 240 Watts, Half-Brick DC - DC Power Converters

Wall Industries, Inc.
Rev F
DCHBW200 SERIES
165~240 Watts, Half-Brick DC/DC Power Converters
PMT-092
PMT-087
COMMON MODE CHOKES
Inductance: 45μH±35%
Impedance: 1.4mΩ, max.
Rated Current: 31.4A, max.
Recommended Through Hole: Ø2.4mm
Inductance: 224μH±35%
Impedance: 4.16mΩ, max.
Rated Current: 15.4A, max.
Recommended Through Hole: Ø1.8mm
Unit: inches (mm)
SIDE VIEW
Ø0.09 (Ø2.2)
PMT-088
Inductance: 521μH±35%
Impedance: 14.25mΩ, max.
Rated Current: 7.7A, max.
Recommended Through Hole: Ø1.0mm
Measurement Instrument (Test Conditions):
L:
HP 4263B LCR Meter (100KHz/100mV)
DCR:
HIOKI 3540mΩ HITESTER
IDC:
Agilent 34401A Meter
4
3
1
2
TOP VIEW
0.63±0.016 (16.0±0.4)
4
3
1
2
Pin 1 Mark
0.55±0.02 (13.9±0.5)
FRONT VIEW
MODEL NUMBER SETUP
DCHBW
Series Name
200
Output Power
200: 200 Watts
-
24
S
12
Input Voltage
Output Quantity Ouptut Voltage
R
Remote On/Off & Pin Length
24: 8.5~36 VDC
9~36 VDC
48: 16.5~36 VDC
110: 43~160 VDC
S: single
3.3: 3.3 VDC
05: 5 VDC
12: 12 VDC
15: 15 VDC
24: 24 VDC
28: 28 VDC
48:48 VDC
None: positive Logic, 0.200” pin length
S: positive Logic, 0.145” pin length
R: negative Logic, 0.200” pin length
RL: negative Logic, 0.145” pin length
Y
Sync Pin ⁽²⁾
SY: sync pin
C
Case Pin ⁽²⁾
CP: case pin
TH
Thru-Hole Inserts ⁽¹⁾
None: threaded inserts
TH: Ø0.126 thru-hole inserts ⁽¹⁾
H
Heatsink ⁽¹⁾
None: no heatsink
H: 0.45” vertical
H1: 0.24” horizontal
H2: 0.24” vertical
H3: 0.45” horizontal
TF
Terminal Block ^{(3) (4)}
None: no terminal block
T: wall mounted
TF: wall mounted with EMC filter
TF1: Wall Mounted with EMC Filter and can be connected to PE
NOTES
1. Models with thru-hole inserts cannot be equipped with a heatsink.
2. No “SY” or “CP” function for terminal block type.
3. Only 0.200” pin length is available with terminal block options.
4. Models with EMC filter (suffix “TF” and “TF1”) meet EN55011, EN55022 Class A.
05/14/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 9 of 10