LV12S28-150 Datasheet, PDF (7/15 Pages) Wall Industries,Inc. – Low Voltage DC-DC Converter 10-36 Vdc Input 28Vdc Output at 5.36A Half-Brick Package

Rev. C
TECHNICAL DATASHEET
LV12S28-150
Paralleling Converters
The LV series converters may be paralleled both for redundancy and for higher output current. However, in order
to do this, a high-current, low V_f, schottky diode must be placed at the +Vo pin of each supply as shown in Figure
6. To improve sharing, tie the two TRIM pins together. The converters may be trimmed by adding a resistor value
from Table 2 from each TRIM pin to ±RS pin, or alternatively, a single resistor of half the value of Table 2 from
the common TRIM pins to the common ±RS pins.
Figure 6: Paralleling Converters
(888) 597-WALL
www.wallindustries.com
Page 7 of 15