PSRL0603D Datasheet, PDF (5/5 Pages) Wall Industries,Inc. – Dual Output Up to 250 Watts AC/DC Switching Power Supply

PSRL0603D Series
Dual Output
Up to 250 Watts
AC/DC Switching Power Supply
I/O CONNECTOR PIN ASSIGNMENT
Input Connector (CN3): Mating Molex Part No. 09-91-0500 or equivalent (5pin, 3 used) PCB is Labeled: L = Line;
N = Neutral; G = Chassis Ground Mating Pins; Molex Engineering Series 2478, 2578, 8818 or Howder M3. 3 pin Terminal
block 6.35MM Center (HD-601-3P).
Output Connector (CN2): Mating Molex Part No. 09-91-0600. Mating Pins: Molex Engineering Series 2478, 2578, 8818.
Howder M3. 3 pin Terminal block 8.25MM Center (HD-819-3P).
Connector Pin Assignment:
(See table below).
Power Good, Remote On/Off mating connectors (CN1): Mating JST Part No. XHP-3 or equivalent (CHYAO SHIUNN JS-
2001-03). Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26.
Signal Pin Assignment:
Pins 1: Power good .
Pins 2: Remote Switch.
Pins 3: RTN.
Fan Drive: Mating JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).
Mounting Inserts: 7 Places M3. Maximum Penetration 2.3mm sees outline drawing for location.
OUTPUT PIN CONNECTION
Howder
Molex
V2: Pin 1
V2: Pin 1
RTN: Pin 2
RTN: Pins 2 – 5
V1: Pin 3
V1: Pins 6 – 8
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]