LV12S12-150 Datasheet, PDF (3/15 Pages) Wall Industries,Inc. – Low Voltage DC-DC Converter 10-36 Vdc Input 12Vdc Output at 12.5A Half-Brick Package

Rev. D
TECHNICAL DATASHEET
LV12S12-150
Table 1: Pin Assignments
Pin # Pin Name
1
-Vo
2
-RS
3
Trim
4
+RS
5
+Vo
6
-Vin
7
CHGND
8 Key Pin/NC
Function
Negative Output
Negative Remote Sense
Output Voltage Trim
Positive Remote Sense
Positive Output
Negative Input
Chassis Ground (Case)
To Key Converter
9
ON/OFF Remote On/Off
10
+Vin Positive Input
Comments
If not used, leave open or short to -Vo
Refer to page 6
If not used, leave open or short to +Vo
Short to –Vin if no chassis ground is available
Leave as a No Connect pin
If not used, leave floating for Active High Unit
If not used, short to –Vin on an Active Low Unit
Figure 1: Mechanical Dimensions
NOTES:
1. PIN TO PIN TOLERANCE ± .01 [±0.3],
PIN DIAMETER TOLERANCE: ±.005 [±0.13].
2. CASE MATERIAL: .040 [1.02] THICK, ALUMINUM ALLOY 3003-0,
PER: QQA 250/2.
3. UNLESS OTHERWISE SPECIFIED.
TO ORDER:
4. UNIT COMES WITH EITHER 3M x 0.5 THREADED THRU
INSERTS OR FOR Ø.125 THRU-HOLE ADD: “TH” SUFFIX TO
MODEL PART NUMBER.
EXAMPLE: LV12S15-100TH
5. CONSULT FACTORY FOR OPTIONAL HEAT SINK.
(888) 597-WALL
www.wallindustries.com
Page 3 of 15