LANCUW15 Datasheet, PDF (3/5 Pages) Wall Industries,Inc. – 15 Watt DC/DC Power Converters

Rev. B
LANCUW15 Series
Single & Dual Outputs
4:1 Input Voltage Range
15 Watt DC/DC Power Converters
MODEL SELECTION TABLES
Model Number
LANC2433UW15
LANC2451UW15
LANC2412UW15
LANC2415UW15
LANC4833UW15
LANC4851UW15
LANC4812UW15
LANC4815UW15
Input Voltage
Range
Output
Voltage
SINGLE OUTPUT MODELS
Output Current
Input Current
Min. Load Full Load No Load ⁽³⁾ Full Load ⁽²⁾
Over Voltage
Protection
3.3 VDC 0mA 4000mA
6mA
654mA
3.9 VDC
24 VDC ^{5.1 VDC}
(9 – 36 VDC) _{12 VDC}
0mA
0mA
3000mA
1250mA
6mA
6mA
741mA
726mA
6.2 VDC
15 VDC
15 VDC 0mA 1000mA
6mA
726mA
18 VDC
3.3 VDC 0mA 4000mA
4mA
323mA
3.9 VDC
48 VDC ^{5.1 VDC}
(18 – 75 VDC) _{12 VDC}
0mA
0mA
3000mA
1250mA
4mA
4mA
375mA
363mA
6.2 VDC
15 VDC
15 VDC 0mA 1000mA
4mA
363mA
18 VDC
Output
Power
Efficiency ⁽⁴⁾
Maximum ⁽⁵⁾
Capacitive Load
13.2W
88%
4700µ F
15W
90%
3300µ F
15W
90%
600µ F
15W
90%
400µ F
13.2W
89%
4700µ F
15W
89%
3300µ F
15W
90%
600µ F
15W
90%
400µ F
Model Number
Input Voltage
Range
Output
Voltage
DUAL OUTPUT MODELS
Output Current
Input Current
Output ⁽⁶⁾
Min. Load Full Load No Load ⁽³⁾ Full Load ^{(2) Ripple & Noise}
Output
Power
Efficiency ⁽⁴⁾
Maximum ⁽⁵⁾
Capacitive Load
LANC2405DUW15
±5 VDC 0mA ±1500mA 6mA
762mA
85mVp-p
15W
86%
24 VDC
LANC2412DUW15
±12 VDC 0mA ±625mA
6mA
735mA
85mVp-p
15W
89%
(9 – 36 VDC)
LANC2415DUW15
±15 VDC 0mA ±500mA
6mA
726mA
85mVp-p
15W
90%
±1500µ F
±288µ F
±200µ F
LANC4805DUW15
±5 VDC 0mA ±1500mA 4mA
381mA
85mVp-p
15W
86%
48 VDC
LANC4812DUW15
±12 VDC 0mA ±625mA
4mA
368mA
85mVp-p
15W
89%
(18 – 75 VDC)
LANC4815DUW15
±15 VDC 0mA ±500mA
4mA
363mA
85mVp-p
15W
90%
±1500µ F
±288µ F
±200µ F
NOTES
1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40°C.
MIL-HDBK-217F Notice2 @Ta=25°C, Full load (Ground, Benign, controlled environment).
2. Maximum value at nominal input voltage and full load.
3. Typical value at nominal input voltage and no load.
4. Typical value at nominal input voltage and full load.
5. Test by minimum Vin and constant resistive load.
6. Ripple and Noise is measured with a 1µF ceramic capacitor in parallel with the output pins.
7. The ON/OFF control pin voltage is referenced to -Vin.
8. The LANCUW15 series can meet EN55022 Class B with an external filter on the input pins to the converter. Please call factory for
more detailed information.
9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is
Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
06/06/2013
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 3 of 5