JC5S33-500 Datasheet, PDF (3/8 Pages) Wall Industries,Inc. – 2:1 Wide Input Range Single and Dual Output 2 Watt DC/DC Converter

JC Series
2:1 Wide Input Range
Single and Dual Output
2 Watt DC/DC Converter
NOTES
1. Specifications typical at +25°C, resistive load, nominal input voltage, rated output current unless otherwise noted.
2. Transient Recovery Time is measured to within 1% error band for a step change in output of 75% to 100%.
3. Ripple and noise measured at 20MHz bandwidth.
4. The JC Series requires a minimum load on the output to maintain specified regulation. Operation under
no-load conditions will not damage these devices, however they may not meet all listed specifications.
5. All DC/DC converters should be externally fused on the front end for protection.
6. Other input and output voltages may be available, please contact factory.
7. Specifications subject to change without notice.
BLOCK DIAGRAMS
Input Voltage Transient Rating
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]