PSRL9802OS Datasheet, PDF (2/3 Pages) Wall Industries,Inc. – 200 Watt Single Output N + 1 Parallel Redundancy AC/DC Switching Power Supply

PSRL9802OS Series
200 Watt Single Output
N + 1 Parallel Redundancy
AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0°C to +40°C
Storage Temperature
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
Frequency 5 ~ 50Hz, acceleration ±7.35 m/(s x s) on X, Y, and Z axis.
Cooling
200W max with 18.7CFM airflow or 150W max under convection cooling.
Fan Drive
12VDC/300mA is available to drive an external fan.
MTBF
100,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
Weight
600 grams
Dimensions
U-Chassis Type Enclosure: 6.8(L) x 3.8(W) x 1.5(H) inches.
Warranty
2 years
SAFETY
EMC Standards
CISPR 22 / EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, EN55024 CE Marked (LVD).
Safety Regulations
Approved to UL60950-1, CSA C22.2 No. 60950-1, TUV EN60950-1, and CB certificate available.
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Output Voltage Preset
Range
Voltage
Output Current
Convection With Forced Air
PSRL9802OSA 3 - 4 VDC
3.3 VDC
22A
30A
PSRL9802OSB 5 - 6 VDC
5 VDC
22A
40A
PSRL9802OSC 12 - 18 VDC 12 VDC
12.5A
16.67A
PSRL9802OSD 24 - 30 VDC 24 VDC
6.25A
8.33A
PSRL9802OSE 48 -56 VDC 48 VDC
3.13A
4.17A
PSRL9802OS36 32 -46 VDC 36 VDC
4.17A
5.56A
Regulation
±1%
±1%
±1%
±1%
±1%
±1%
Ripple &
Noise
±1%
±1%
±1%
±1%
±1%
±1%
NOTES
1. All output ranges are covered in agency certifications and the preset voltage will be set as standard models.
If any request is not standard output, then please contact us in advance.
2. 1% minimum load is required to maintain the ripple and regulation.
3. Maximum 200W continuous output, with minimum 18.7 CFM forced ventilation.
4. Maximum 150W continuous output with air convection, except PSRL9802OSA and PSRL9802OSB which
Power is limited to 22A.
5. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output terminals with parallel 0.1uF ceramic
and 22uF electrolytic capacitors.
6. All series N+1 parallel redundancy.
7. Optional top cover available. Please call factory for ordering details.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]