PSRL5017R8-NI Datasheet, PDF (2/4 Pages) Wall Industries,Inc. – Up to 800 Watts Single Output with Active PFC Forced Current Sharing Series AC/DC Switching Power Supply

PSRL5017R8-NI Series
Up to 800 Watts
Single Output with Active PFC
Forced Current Sharing Series
AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
GENERAL SPECIFICATIONS (CONTINUED)
Current Sharing
Designated as CSH on the CN3, optional single wired for forced current sharing function and parallel up to 4
units within 10% accuracy at full load.
Current Monitor
Designated as CMN on the CN3 is a 0.5V to 3VDC output voltage to represent 0% to 100% output current.
LED Display
Bi-color LED1 emit Green for Power On and emit Orange when protection is enabled or RSW is applied a low
signal.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
Storage Temperature
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z axis.
Cooling
U Type (U-Chassis): 25CFM to achieve maximum power
E & F Type (Enclosed with built-in fan): Self cooled by built-in fan.
MTBF
150,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
Weight
U Type (U-Chassis): 1350 grams
E & F Type (Enclosed with built-in fan): 1450 grams
Dimensions
U Type (U-Chassis): 8(L) x 4.33(W) x 2.5(H) inches.
E Type (Enclosed with built-in fan): 9.17(L) x 4.25(W) x 2.5(H) inches.
F Type (Enclosed with top built-in fan): 8(L) x 4.33(W) X 3.4(H) inches.
Warranty
2 years
SAFETY
Emissions
FCC part15, CISPR 22 Class B, Conducted.
Safety Regulations
Approved to UL60950-1, CSA C22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3, and
IEC61000-4 Series Regulations and CB.
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Output Voltage Preset
Range
Voltage
Output
Current
PSRL5017Rx8-12NI
PSRL5017Rx8-15NI
12 – 14 VDC
15 – 19 VDC
12 VDC
15 VDC
62.5A
50A
PSRL5017Rx8-24NI 20 – 26 VDC
24 VDC
40A
PSRL5017Rx8-36NI
PSRL5017Rx8-40NI
PSRL5017Rx8-48NI
27 – 36 VDC
37 – 47 VDC
48 – 60 VDC
36 VDC
40 VDC
48 VDC
29.63A
21.62A
16.67A
Regulation Ripple & Noise Output Power
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
750W
750W
800W
800W
800W
800W
NOTES
1. PSRL5017R8-NI Series is designated as PSRL5017Rxy-z where x can be E (enclosed with end side built-in fan), U (U-Chassis with
optional cover), or F (enclosed with top built-in fan), y = 8 for output power from 750W to 800W, and z can be 12NI, 15NI, 24NI, 36NI,
40NI, or 48NI for output voltage (I denote forced current sharing option (output with internal OR-ring diode).
2. All output ranges are covered in agency certifications and preset voltage will be set as standard models. If any request is not preset
output, then please contact us in advance.
3. U-Chassis type needs external forced airflow min. 25CFM to achieve maximum power.
4. Ripple & noise are measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1uF ceramic and 22uF electrolytic capacitors.
5. Providing peak power to 900W within 500uS for all models, longer duty duration need contact manufacturer.
6. 1% minimum load is required to maintain the ripple and regulation.
7. Cover is optional for U-Chassis Type. Please call factory for ordering details.
8. Output is fully isolated.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]