PSRL5016U3 Datasheet, PDF (2/3 Pages) Wall Industries,Inc. – Active PFC 300 Watt Single Output AC/DC Switching Power Supply

PSRL5016U3 Series
Active PFC
300 Watt Single Output
AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
Storage Temperature
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z Axis.
Cooling
PSRL5016U3 Series (U-Chassis): 22CFM forced airflow to achieve maximum power.
PSRL5016E3 Series (Enclosed with built-in fan): Self cooled by built-in fan.
Fan Drive
12VDC/400mA is available to drive an external fan.
MTBF
100,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
Weight
PSRL5016U3 Series (U-Chassis): 950g
PSRL5016E3 Series (Enclosed with built-in fan): 1050g
Dimensions
PSRL5016U3 Series (U-Chassis): 7(L) x 4(W) x 2(H) inches.
PSRL5016E3 Series (Enclosed with built-in fan): 8(L) x 4(W) x 2(H) inches.
Warranty
2 years
SAFETY
Emissions
FCC part15, CISPR 22 Class B, Conducted.
Safety Regulations
Approved to UL60950-1, CSA C22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3, &
IEC61000-4 Series Regulations and CB.
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Output Voltage Range Preset Voltage Output Current
PSRL5016U3-12
PSRL5016U3-18
PSRL5016U3-24
PSRL5016U3-36
PSRL5016U3-48
12 - 15 VDC
16 - 21 VDC
22 - 30 VDC
31 - 41 VDC
42 - 55 VDC
12 VDC
18 VDC
24 VDC
36 VDC
48 VDC
25A
18.75A
13.64A
9.68A
7.15A
Regulation
±1%
±1%
±1%
±1%
±1%
Ripple & Noise
±1%
±1%
±1%
±1%
±1%
NOTES
1. PSRL5016U3 Series is designated as PSRL5016xy-z where x = U (U-Chassis type), y = 3 for output power of 300W, and
z = 12, 18, 24, 36, or 48 for output voltage.
2. PSRL5016E3 Series: Self-cooled by built-in fan; PSRL5016U3 Series: 22 CFM forced airflow to achieve maximum power.
3. Providing peak current for 500uS with standard models, longer duty duration should contact manufacture.
4. All output ranges are covered in agencies certification and preset voltage will be set as standard mode if any request other
than standard output then should contact us in advance.
5. 1% minimum load is required to maintain the ripple and regulation.
6. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output terminals with parallel 0.1µF ceramic and 22µF
electrolytic capacitors.
7. Output is fully isolated.
8. Optional Top cover available please call factory for ordering details.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]