PSRL0402D Datasheet, PDF (2/4 Pages) Wall Industries,Inc. – 400 Watt with Airflow Medical Approved Dual Output AC/DC Switching Power Supply with Active PFC

PSRL0402D Series
400 Watt with Airflow
Medical Approved Dual Output
AC/DC Switching Power Supply with Active PFC
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
Storage Temperature
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
Frequency 5 ~ 50Hz, acceleration ±7.35 m/(s x s) on X, Y, and Z axis.
Cooling
U Type (U-Chassis): 400W max with 23CFM airflow or 250W max under convection cooling.
E Type (Enclosed with side built-in fan): 400W
Fan Drive
12VDC/400mA is available to drive an external fan.
MTBF
100,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
Weight
U Type (U-Chassis): 1.3Kg
E Type (Enclosed with side built-in fan): 1.6Kg
Dimensions
U Type (U-Chassis): 8(L) x 5(W) x 1.6(H) inches.
E Type (Enclosed with side built-in fan): 9(L) x 5(W) x 1.6(H) inches.
Warranty
2 years
SAFETY
Emissions
FCC part15, CISPR 22 Class B, Conducted.
Safety Regulations
Approved to UL60950-1/ 60601-1, CSA C22.2 No. 60950-1-03/ 601.1-M90, TUV EN60950-1/ 60601-1,
CE Mark (LVD) EN61204-3/ 60601-1-2/ 61000-3-2,3, and IEC61000-4 Series Regulations and CB.
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Output Voltage
Range
Output Current
Convection
22.95CFM
PSRL0402Dx-0312
V₁: +3.3 VDC
30A
40A
V₂: +12 VDC
16.7A
25A
PSRL0402Dx-0324
PSRL0402Dx-0512
PSRL0402Dx-0524
V₁: +3.3 VDC
V₂: +24 VDC
V₁: +5 VDC
V₂: +12 VDC
V₁: +5 VDC
V₂: +24 VDC
30A
8.34A
30A
16.7A
30A
8.34A
40A
12.5A
40A
25A
40A
12.5A
PSRL0402Dx-1224
V₁: +12 VDC
V₂: +24 VDC
16.7A
8.3A
25A
12.5A
Regulation Ripple & Noise
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
NOTES
1. PSRL0402D Series is designated as PSRL0402Dx-y where x can be U-chassis (Type U), U-chassis with top cover
(Type C), or Enclosed with side built-in Fan (Type E), y can be 0312, 0324, 0512, 0524 and 1224 for output voltage.
2. 10% minimum load is required for all outputs to maintain the ripple and regulation.
3. Output is fully isolated.
4. Total combined power of V1 and V2: 400W max. with 22.95 CFM forced air and 250W convection cooling for
PSRL0402DU-1224; 400W for PSRL0402DE-1224 by self-cooling. 300W max. with 22.95 CFM forced air and 200W
convection cooling for other PSRL0402DU-y models; 300W for other PSRL0402DE-y models by self-cooling.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]