PSPS45 Datasheet, PDF (2/3 Pages) Wall Industries,Inc. – Single Output Up to 48 Watts AC/DC Power Supply

PSPS45 Series
Single Output
Up to 48 Watts
AC/DC Power Supply
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Input Voltage
Output
Voltage
Voltage Adj.
Range
Rated
Current
PSPS-45-3.3
3.3 VDC 3.14 ~ 3.63V
8A
PSPS-45-5
5 VDC
4.75 ~ 5.5V
8A
PSPS-45-7.5
7.5 VDC 7.13 ~ 8.25V
5.4A
PSPS-45-12
PSPS-45-13.5
PSPS-45-15
90 ~ 264VAC
(127 ~ 370VDC)
12 VDC
13.5 VDC
15 VDC
11.4 ~ 13.2V
12.8 ~ 14.85V
14.25 ~ 16.5V
3.7A
3.3A
3A
PSPS-45-24
24 VDC
22.8 ~ 26.4V
1.9A
PSPS-45-27
27 VDC 25.65 ~ 29.7V
1.7A
PSPS-45-48
48 VDC
45.6 ~ 52.8V
1A
Current
Range
0 ~ 10.7A
0 ~ 10.5A
0 ~ 7A
0 ~ 4.4A
0 ~ 3.9A
0 ~ 3.5A
0 ~ 2.2A
0 ~ 1.95A
0 ~ 1.1A
Ripple &
Noise
80mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
Output
Power
26.4W
40W
40.5W
44.4W
44.6W
45W
45.6W
45.9W
48W
Over Voltage
Protection
Efficiency
3.8 ~ 4.46V
69%
5.75 ~ 6.75V
74%
8.63 ~ 10.1V
75%
13.8 ~ 16.2V
76%
15.5 ~ 18.2V
77%
17.25 ~ 20.25V 77%
27.6 ~ 32.4V
78%
31 ~ 36.45V
78%
55.2 ~ 64.8V
78%
NOTES
1. All parameters not specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature.
2. Ripple & noise are measured at 20MHz using a 12" twisted pair-wire terminated with 0.1uF & 47uF capacitors in parallel.
3. Tolerance: includes set up tolerance, line regulation, and load regulation.
4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-
confirmed that it still meets EMC directives.
5. Mounting holes M1 and M2 should be grounded for EMI purposes.
BLOCK DIAGRAM
fosc: 65KHz
DERATING CURVE
STATIC CHARACTERISTICS (12V)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]