English
Language : 

PSPDS-15 Datasheet, PDF (2/4 Pages) Wall Industries,Inc. – AC/DC Switching Power Supply
Rev. A
PSPDS-15 Series
Single Output
Up to 16.8 Watts
AC/DC Switching Power Supply
SPECIFICATIONS: PSPDS-15 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
AC Current
88 ~ 264VAC
47 to 63Hz
0.7A max
Inrush Current (typical)
20A @ 115VAC; 40A @ 230VAC Cold Start
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Voltage Adjustment Range
See Table
±3.0%
±5% of rated output voltage
Line Regulation
Load Regulation
±1.0%
±2.0%
Output Current
Ripple & Noise (See Note 1)
See Table
See Table
Setup Time
Hold Up Time
< 2.0s at 115VAC and full load; < 1.0s at 230VAC and full load
> 10ms at 115VAC and full load; > 20ms at 230VAC and full load
Temperature Coefficient
Overshoot and Undershoot
±0.03%/°C
< 5.0%
PROTECTION
Over Load Protection
Over Voltage Protection
105% ~ 150% of rated output current, hiccup mode, auto-recovery
105% ~ 150% of rated output voltage, constant voltage
Short Circuit Protection
Long-term mode, auto-recovery
GENERAL SPECIFICATIONS
Efficiency (typical)
Primary to Secondary
Withstand Voltage Primary to PG
Secondary to PG
See Table
3000VAC; ≤ 10mA
1500VAC; ≤ 10mA
500VDC; ≤ 10mA
Isolation Resistance
Leakage Current
Input to Output
Input to PG
≥ 100MΩ
< 0.25mA
< 3.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
-20°C to +70°C
Storage Temperature
Working Humidity
-40°C to +85°C
20 ~ 90% RH non-condensing
Storage Humidity
Cooling Method
10 ~ 95% RH non-condensing
Free air convection
MTBF (MIL-HDBK-217F)
> 100,000 hours @ 25°C and full load
PHYSICAL SPECIFICATIONS
Dimensions (L x W x H)
Packing
3.11 x 2.01 x 1.10 inches (79 x 51 x 28 mm)
48PCS/CTN, 10.4Kgs, 0.03CBM
SAFETY & EMC (See Note 2)
Safety Standards
EMI Conduction and Radiation
GB4943-2001, EN60950-1: 2006
Compliance to EN55022 (CISPR22) Class B
Harmonic Current
EMS Immunity
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A
11/15/2010
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 4