PSMHBU60 Datasheet, PDF (2/3 Pages) Wall Industries,Inc. – AC/DC Switching Power Supplies

Wall Industries, Inc.
Rev A
PSMHBU60 SERIES
60W Medical AC/DC Switching Power Supplies
SPECIFICATIONS: PSMHBU60 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage
Input Frequency
Input Current
TEST CONDITIONS
Safety Approvals Input Voltage Range
Operating Input Voltage Range
100VAC, full load
240VAC, full load
Min Typ Max Unit
100
240
VAC
90
264
47
63
Hz
1.62
A
0.72
Inrush Current
100VAC, full load, 25°C, cold start
230VAC, full load, 25°C, cold start
31
A
62
No Load Power Consumption
OUTPUT SPECIFICATIONS
230VAC, no load
0.5
W
Output Voltage
Line Regulation
Load Regulation
LL to HL, full load
230VAC
See Table
1
%
5
%
Output Power
60
W
Output Current
See Table
Ripple & Noise (peak to peak)
Hold-up Time
Start-up Time
90VAC, full load
110VAC, full load
100VAC, full load
1
%
12
ms
0.3
2
s
Transient Response Time
100VAC, Full load to half load
4
ms
Temperature Coefficient
PROTECTION
Over Voltage Protection
0~50°C
-0.04
112
+0.04
132
%/°C
%
Over Current Protection
110
150
%
GENERAL SPECIFICATIONS
Efficiency
Dielectric Withstanding Voltage
230 VAC, full load
Primary to Secondary (2MOPP Insulation)
Primary to PE
78.4
6492
2121
89
%
VDC
Isolation Resistance
Test Voltage = 500VDC
50
MΩ
Leakage Current
240VAC/60Hz
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Derating linearly from 100% Load at 40°C to 50% load at 70°C
0
Storage Temperature
-40
0.25
mA
+70
°C
+85
°C
Operating Humidity
0
95
%
Storage Humidity
Operating Altitude
Cooling
0
95
%
Up to 3000m
Free air convection
MTBF
MIL-HDBK-217F, 25°C
100,000
hours
PHYSICAL SPECIFICATIONS
Weight
Dimensions (L x W x H)
4.9oz (140g)
3.98 x 2.00 x 1.00 inches (101.0 x 50.8 x 25.4 mm)
Input Connector
Mates with Molex housing 09-50-3031/35977-0300 and Molex 2478/35922 series crimp terminal
Output Connector
SAFETY & EMC
Safety Approvals
EMI Requirements for CISPR-11
220VAC
Mates with Molex housing 09-50-3061/35977-0600 and Molex 2478/35922 series crimp terminal
ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd edition); EN 60601-1:2006 (TUV/T-mark 3rd edition); CE
B
Class
EMI Requirements for FCC PART-18
110VAC
B
Class
01/31/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 2 of 3