PSMBU153 Datasheet, PDF (2/4 Pages) Wall Industries,Inc. – AC/DC Switching Power Supplies

Rev. A
PSMBU153 Series
150 Watt, Open Frame
Single Outputs, Active PFC
Medical AC/DC Power Supplies
SPECIFICATIONS: PSMBU153 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min Nom Max Unit
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Low Line
High Line
Inrush Current
Low Line
High Line
Power Factor Correction (PFC)
No Load Power Consumption
Safety Approvals Input Voltage Range
Operating Input Voltage Range
Io = Full Load, Vin = 100VAC
Io = Full Load, Vin = 240VAC
Io = Full Load, 25°C, Cold Start, Vin = 115VAC
Io = Full Load, 25°C, Cold Start, Vin = 230VAC
Io = Full Load, Vin = 240VAC
Io = No Load, Vin = 230VAC
100
90
240
260
VAC
47
63
Hz
1.74
0.71
1.76
0.73
A
50
100
A
0.95
1.0
1.2
W
OUTPUT SPECIFICATIONS
Output Voltage
Load Regulation
Line Regulation
Output Power
Output Current
Ripple & Noise (peak to peak)
Transient Response Time
Hold-Up Time
Start-Up Time
Temperature Coefficient
Vin = 230VAC
Io = Full Load
Vin = 90~260VAC
Full Load, Vin = 90VAC
Io = Full Load to Half Load, Vin = 100VAC
Io = Full Load, Vin = 110VAC
Io = Full Load, Vin = 100VAC
3
0.5
20
-0.04
See Table
5
1
150
See Table
1
4
2
+0.04
%
%
W
%
ms
ms
s
%/°C
PROTECTION
Over Voltage Protection
Over Current Protection
112
132
%
110
150
%
GENERAL SPECIFICATIONS
Efficiency
Dielectric Withstanding Voltage
Isolation Resistance
Safety Ground Leakage Current
Io = Full Load, Vin = 230VAC
Primary to Secondary
Primary to PE
Test Voltage = 500VDC
Vin = 240VAC/60Hz
84
6990
2121
50
89
%
VDC
MΩ
0.25
mA
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
MTBF
Derating linearly from 100% Load at 50°C to 50% load at 70°C
Operating Temperature at 25°C, calculated per MIL-HDBK-217F
0
-40
0
0
100,000
+70
+85
95
95
3000
°C
°C
%
%
m
hours
PHYSICAL SPECIFICATIONS
Weight
Dimensions (L x W x H)
Input Connector
Output Connector
Approx. 14.8oz (420g)
5.00 x 3.00 x 1.44 inches (127.0 x 76.2 x 36.6 mm)
Mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal
Mates with Molex housing 09-50-3081 and Molex 2478 series crimp terminal or
DINKLE#DT-2GN-B01W-04P and DINKLE#ESK750V-04P
SAFETY & EMI
EMI Requirements for CISPR-11
EMI Requirements for FCC PART-18
Safety Approvals
Vin = 220VAC
B
Class
Vin = 110VAC
B
Class
ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3^rd edition); EN 60601-1:2006 (TUV/T-mark 3^rd edition); CE
10/01/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 2 of 4