PSHF35W Datasheet, PDF (2/3 Pages) Wall Industries,Inc. – AC/DC Switching Power Supplies

Wall Industries, Inc.
Rev B
PSHF35W SERIES
Up to 36 Watts, AC/DC Switching Power Supplies
Model Number ⁽¹⁾
PSHF35W-SE-5
PSHF35W-SE-12
PSHF35W-SE-15
PSHF35W-SE-24
PSHF35W-SE-48
Input Voltage Range
170~264 VAC
(210~370 VDC)
MODEL SELECTION TABLE
Output Voltage Output Current Voltage Tolerance
5 VDC
7.0A
±2%
12 VDC
3.0A
±1%
15 VDC
2.4A
±1%
24 VDC
1.5A
±1%
48 VDC
0.7A
±1%
Ripple & Noise ⁽²⁾
80mVp-p
120mVp-p
120mVp-p
150mVp-p
150mVp-p
Output Power
35W
36W
36W
36W
33.6W
Efficiency
77%
81%
82%
83%
85%
NOTES
1. Single output voltages are available from 5~48VDC. If the desired output voltage is not listed in the table please call factory for more ordering options.
2. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel.
3. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
MECHANICAL DRAWING
0.26
[6.5]
3.43 [87.0]
Ø0.14 [Ø3.5]
0.71 [18.0]
2.91 [74.0]
Ø0.14 [Ø3.5]
0.27 [6.8]
Unit: inches [mm]
PIN CONNECTIONS
Pin
Assignment
1
AC/L
2
AC/N
3
PE
4
DC OUTPUT (-V)
5
DC OUTPUT (+V)
0.81 [20.5]
2.17 [55.0]
1
2
3
4
5
Vadj
LED
Ø0.14 [Ø3.5]
Ø0.14 [Ø3.5]
2 - M3
0.20
[5.0]
3.48 [88.5]
3.88 [98.5]
Frame
NOTICE:
Mounting screws into
frame max. 3mm
07/21/2014
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 2 of 3