DD24S33-14000 Datasheet, PDF (2/3 Pages) Wall Industries,Inc. – DC/DC Converter 60 Watt Single Output 2:1 Wide Input Voltage Range

DD Series
DC/DC Converter
60 Watt Single Output
2:1 Wide Input Voltage Range
SPECIFICATIONS (CONTINUED)
All specifications apply @ 25°C ambient unless otherwise noted
PHYSICAL SPECIFICATIONS
Weight .................................................................................... 60g (2.11 oz)
Dimensions ................. 2.02 x 2.02 x 0.40 inches (51.3 x 51.3 x 10.2 mm)
Case Material ............................................................ Nickel-coated copper
Base Material .................................................... Non-conductive black FR4
Potting material ................................................................Epoxy (UL94-V0)
Shielding .................................................................................... six – sided
SAFETY & EMC (See Note 5)
Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1
Conducted Emissions................. EN55022 ...................................... Class A
Radiated Emissions.................... EN55022 ...................................... Class A
ESD ............................................ EN61000-4-2.....................Perf. Criteria B
Radiated Immunity...................... EN61000-4-3..................... Perf. Criteria A
Fast Transient............................. EN61000-4-4.....................Perf. Criteria B
Surge .......................................... EN61000-4-5.....................Perf. Criteria B
Conducted Immunity................... EN61000-4-6.................... Perf. Criteria A
Due to advances in technology, specifications subject to change without notice
OUTPUT VOLTAGE / CURRENT RATING CHART
Model Number Input Range
Output
Voltage
Output Current
Min. Load Full Load
DD24S3.3-14000
3.3 VDC
0mA 14,000mA
DD24S5-12000
24VDC
5 VDC
0mA 12,000mA
DD24S12-5000
(18 – 36 VDC) _{12 VDC}
0mA 5000mA
DD24S15-4000
15 VDC
0mA 4000mA
DD48S3.3-14000
3.3 VDC
0mA 14,000mA
DD48S5-12000
48VDC
5 VDC
0mA 12,000mA
DD48S12-5000
(36 – 75 VDC) _{12 VDC}
0mA 5000mA
DD48S15-4000
15 VDC
0mA 4000mA
Output
Ripple & Noise
75mVp-p
75mVp-p
100mVp-p
100mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
Input Current
No load⁽⁶⁾ Full Load⁽⁷⁾
Efficiency ⁽⁸⁾
Max Capacitive
Load ⁽⁹⁾
90mA 2264mA
89%
36,000µF
100mA 2874mA
91%
20,400µF
120mA 2907mA
90%
3550µF
120mA 2907mA
90%
2300µF
90mA 1132mA
89%
36,000µF
100mA 1437mA
91%
20,400µF
100mA 1453mA
90%
3550µF
100mA 1453mA
90%
2300µF
NOTES
1. Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +sense should be
connected to its corresponding +OUTPUT and likewise the -sense should be connected to its corresponding –OUTPUT.
2. The ON/OFF control function: There are positive (standard) and negative logic (option). The pin voltage is referenced to negative input.
To order negative logic ON/OFF control add the suffix “R” to the part number (Ex: DD48S5-12000R)
3. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
MIL-STD-217F Notice2 @ Ta=25°C, Full Load (Ground, Benign, controlled environment).
4. Heat sink is optional. Please call factory for ordering details.
5. The DD series required an external filter to meet EN55022 class A. (TBD)
6. Typical Value at nominal input voltage.
7. Maximum value at nominal input voltage and full load
8. Typical Value at nominal input voltage and full load.
9. Test by minimum Vin and constant resistive load.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]