JFW24S12-1300 Datasheet, PDF (14/16 Pages) Wall Industries,Inc. – DC/DC Converter

Packaging Information:
Figure 19
Figure 20
TECHNICAL DATASHEET
JFW24S12-1300
DIP Type
DIP Type
NOTES:
1. Material: PS (thick=1.2mm)
SMT Type
NOTES:
1. 10 sprocket hole pitch cumulative tolerance ±0.2
2. Camber not to exceed 1mm in 100mm.
3. Material: Black Advantek Polystyrene.
4. Ao and Bo measured on a plane 0.3mm above
the bottom of the pocket.
5. Ko measured from a plane on the inside bottom of
the pocket to the top surface of the carrier tape.
6. Pocket position relative to sprocket hole measured
as true position of pocket, not pocket hole.
(888) 597-WALL
www.wallindustries.com
Page 14 of 16