JF24S15-1000 Datasheet, PDF (13/15 Pages) Wall Industries,Inc. – DC/DC Converter

Packaging Information:
Figure 15
Figure 16
TECHNICAL DATASHEET
JF24S15-1000
DIP Type
DIP Type
NOTES:
1. Material: PS (thick=1.2mm)
SMT Type
NOTES:
1. 10 sprocket hole pitch cumulative tolerance ±0.2
2. Camber not to exceed 1mm in 100mm.
3. Material: Black Advantek Polystyrene.
4. Ao and Bo measured on a plane 0.3mm above
the bottom of the pocket.
5. Ko measured from a plane on the inside bottom of
the pocket to the top surface of the carrier tape.
6. Pocket position relative to sprocket hole measured
as true position of pocket, not pocket hole.
(888) 597-WALL
www.wallindustries.com
Page 13 of 15