FA12S15-300 Datasheet, PDF (11/14 Pages) Wall Industries,Inc. – 300W DC-DC Converter

WALL INDUSTRIES, INC.
Rev C
TECHNICAL DATASHEET
FA12S15-300
TEST SETUP:
The FA12S15-300 specifications are tested with the following configurations:
Regulation and Efficiency Setup
To ensure that accurate measurement are taken, the voltage measurements are taken directly at the terminals of the module. This
minimizes errors due to contact and trace lengths between the load and the output of the supply. The following diagram is of the test
setup.
Figure 5: Regulation and Efficiency Probe Setup
Output Ripple Voltage Setup
The module is tested with a 0.1µF ceramic capacitor in parallel with a 10µF tantalum capacitor across the output terminals. Unless
otherwise specified, bandwidth is limited to 20MHZ.
Figure 6: Ripple Voltage Probe Setup
(888) 597-WALL
www.wallindustries.com
Page 11 of 14