PSPW250 Datasheet, PDF (1/6 Pages) Wall Industries,Inc. – AC/DC Switching Power Supplies

PSPW250 SERIES
90~264VAC Input Voltage
200 Watts with Free Air Convection
250 Watts with 17.1CFM Forced Air
AC/DC Switching Power Supplies
DATASHEET
Rev. D
Type O
FEATURES
 Single Outputs
 RoHS Compliant
 Power Factor > 0.9
 90~264VAC Input Voltage Range
 85% High Efficiency
 250W with 17.1CFM Forced Air
 200W with Convection Cooling
 High Power Density
Type U
 No Minimum Load Requirement
 Over Load, Over Voltage, and Short Circuit Protection
 Ultra Low Leakage Current < 300µA at 264VAC
 Open Frame and U-Chassis Mechanical Options Available
 UL/cUL 60950-1, 2^nd Edition, CSA 22.2-No.60950-1-07,
and NEMKO EN60950-1:2006+A11 Safety Approvals
 Meets CE, FCC Class B, CISPR22 Class B, and EN55022
Class B EMC Standards
DESCRIPTION
The PSPW250 series of AC/DC switching power supplies offers 250 Watts of output power with 17.1CFM
forced air and 200 Watts with convection cooling. All models have a single output, a 90~264VAC input voltage
range, and a power factor greater than 0.9. These units are also protected against short circuit, over load, and
over voltage conditions. All models have UL/cUL 60950-1, 2^nd Edition, CSA 22.2 No.60950-1-07, and NEMKO
EN60950-1:2006+A11 safety approvals. This series is RoHS compliant and meets CE, FCC Class B, CISPR22
Class B, and EN55022 Class B EMC standards. Models are available in both open frame (Type O) and U-chassis
(Type U) designs.
12/06/2011
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 1 of 6