PSPSP1500 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 1500 Watt Single Output Built-In Active PFC Function AC/DC Switching Power Supply

PSPSP1500 Series
1500 Watt Single Output
Built-In Active PFC Function
AC/DC Switching Power Supply
FEATURES
● 3 Year Warranty
● Low Cost, High Reliability
● 100% Full Load Burn-In Tested
● Built-In Remote Sense Function
● Built-In Remote ON/OFF Control
● Built-In Active PFC Function, ≥ 0.95
● AC Input Active Surge Current Limiting
● Built-In Constant Current Limiting Circuit
● Built-In Active Current Sharing and Parallel Function
● Short Circuit, Overload, Over Voltage, and Over Temperature Protected
SPECIFICATIONS: PSPSP1500 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
176 ~ 264VAC (248 ~ 370VDC)
Input Frequency
47 to 63Hz
AC Current (typical)
8.4A @ 230VAC
Inrush Current (typical)
80A @ 230VAC
Leakage Current
< 3.5mA @ 240VAC
Power Factor (typical)
0.96 @ 230VAC and full load
Remote ON/OFF Control
RC+/RC-: 0 ~ 0.8V = power on; 4 ~ 10V = power off sink current < 30mA
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power
See Table
Voltage Tolerance (See Note 3)
5V output: 6%, 12V output: 3%, 13.5V & 15V outputs: 2%, 24V - 48V outputs: 1%
Voltage Adjustment Range
See Table
Line Regulation
5V output: 0.5%, 12V - 15V outputs: 0.3%, 24V - 48V outputs: 0.2%
Load Regulation
5V output: 2.0%, 12V - 48V outputs: 0.5%,
Output Current
See Table
Ripple & Noise (max) (See Note 2)
5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
Setup, Rise Time
1500ms, 50ms @ 230VAC and full load
Hold Up Time (typical)
24ms @ 230VAC and full load
Temperature Coefficient
±0.03%/°C (0 ~ 50°C)
PROTECTION
Overload Protection
115 ~ 140% rated output power
Protection Type: Constant current limiting; recovers automatically after fault condition is removed
Over Voltage Protection
See Table
Protection Type: Shutdown output voltage; re-power on to recover
Over Temperature Protection
95°C (TSW1) detect on the heatsink of PFC MOSFET 90°C (TSW2) detect the winding of output choke
Protection Type: Shutdown output voltage; recovers automatically after temperature goes down
GENERAL SPECIFICATIONS
Efficiency (typical)
See Table
Withstand Voltage
3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG)
Isolation Resistance
100MΩ/500DC (Input to Output, Input to FG, and Output to FG)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
-10°C to +60°C (refer to output load derating curve)
Storage Temperature
-20°C to +85°C
Working Humidity
20 ~ 90% RH non-condensing
Storage Humidity
10 ~ 95% RH
Vibration
10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes.
MTBF
43,400 hours min. @ 25°C (MIL-HDBK-217F)
PHYSICAL SPECIFICATIONS
Weight
6900 grams
Dimensions
278(L) x 129(W) x 190.5(H) mm
Warranty
3 years
SAFETY & EMC
Safety Standards
UL60950-1, TUV EN60950-1 approved
EMI Conduction & Radiation
Compliance to EN55022 (CISPR22) Class B
Harmonic Current
Compliance to EN61000-3-2,-3
EMS Immunity
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]