PSPSF100 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – AC/DC LED Switching Power Supplies

Wall Industries, Inc.
Rev A
PSPSF100 SERIES
96 Watt, AC/DC LED Switching Power Supplies
E347942 LEVEL3
IP67
Size:
5.66 x 2.79 x 1.48 inches
143.8 x 70.8 x 37.5 mm
FEATURES
• Isolation Class II
• RoHS Compliant
• PFC Function, PF>0.9
• Single Outputs
• Double Layered PCB
• Free Air Convection
• Up to 90% High Efficiency
• 96 Watts Maximum Output Power
• Fully Isolated Plastic Case with IP67 Level
• 90~295VAC Input Voltage Range
• Short Circuit, Over Voltage, and Over Load Protection
• Constant Current (CC) & Constant Voltage (CV) Modes
• UL8750, IEC/EN 61347-2-13, & IEC/EN 61347-1 Approvals
• LED Power Applications
DESCRIPTION
The PSPSF100 series of AC/DC LED switching power supplies provides a maximum power rating
of 96W in a 5.66” x 2.79” x 1.48” fully isolated plastic case. These supplies meet IP67 waterproof
standards, which makes them suitable for harsh environments in industrial or commercial
outdoor lighting applications. The PSPSF100 series consists of single output models with an
input voltage range of 90-295VAC. Some features include high efficiency up to 90%, power
factor > 0.9, and short circuit, over voltage, and over load protection. The PSPSF100 series has
both constant current (CC) and constant voltage (CV) modes and is suitable for LED lighting
applications. This series is also RoHS compliant and has UL8750, IEC/EN 61347-1, and IEC/EN
61347-2-13 safety approvals.
Model Number
PSPSF100-24S
Input Voltage Range
MODEL SELECTION TABLE
Output Voltage ⁽²⁾
Output Current
Min
Max
24 VDC (15.6~24 VDC) 2.6 A
3.5 A (2.6~4.0 A)
Output Power Ripple & Noise ⁽¹⁾ Efficiency
96 W
2.7Vp-p
89%
PSPSF100-36S
PSPSF100-48S
90 ~ 295 VAC
36 VDC (23.4~36 VDC)
48 VDC (31.2~48 VDC)
1.72 A
1.3 A
2.1 A (1.72~2.65 A)
1.75 A (1.3~2.0 A)
96 W
96 W
5Vp-p
90%
5Vp-p
89%
PSPSF100-54S
54 VDC (35.1~54 VDC) 1.15 A 1.4 A (1.15~1.77 A)
95.6 W
5Vp-p
90%
NOTES
1. Measured at 20MHz bandwidth and with 0.1µF and 47µF capacitors in parallel.
2. Input Voltage = 115VAC or 230VAC. This is suitable operation region for LED related applications but please reconfirm special electrical requirements for
some specific system designs.
DERATING CURVES
Load vs Ambient Temperature
120
Others
Under 120VAC
100
80
60
50%
40
20
0
-30 -20 0
20
40 ⁴⁵
60 70 80
Ambient Temperature (°C)
Load vs Input Voltage
120
100
Ta=25°C
80
60
40
20
0
90 120 135 155 230 264 295
Input Voltage (VAC)
Note: If the output is not connected to LEDs, the input voltage must be
greater than 180VAC
08/06/2013
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 1 of 3