PSM Datasheet, PDF (1/2 Pages) Wall Industries,Inc. – Open Frame 40~65 Watts Single Output AC/DC Medical Power Supply

PSM Series
Open Frame
40~65 Watts Single Output
AC/DC Medical Power Supply
FEATURES
● Open Frame
● Single Output
● Universal AC Input: 90~264VAC
● Output Voltages from 5 to 52VDC
● Over Voltage/ Over Load/ Short Circuit Protected
● 4(L) x 2(W) x 1.18(H) inches (101.6 x 50.8 x 30 mm)
SPECIFICATIONS: PSM Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 – 264VAC
Input Frequency
47 to 63Hz
Input Current
2A(rms) @ 115VAC
Inrush Current
< 40A @ 115VAC at 25°C cold start, < 80A @ 230VAC at 25°C cold start
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power Range
65 Watts max with convection cooling.
Output Regulation
See table
Output Current
See Table
Ripple & Noise (20MHz BW)
1%
Hold-Up Time
10ms at max watt load and 115VAC nominal line.
Temperature Coefficient
All outputs ±0.04%/°C max.
PROTECTION
Short Circuit Protection
Auto recover
Over Voltage Protection
Output 110% to 130% above following nominal output. Latching Type. AC recycle.
Over Load Protection
Over load protected @ 120% to 180% above following maximum rating. Auto recover.
GENERAL SPECIFICATIONS
Efficiency
80% typical at full output
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0°C to +50°C ambient, each output derates at 2.5% per degree from +50°C to 70°C.
Humidity (non-condensing)
20% to 90%
Cooling
Free air convection
MTBF
100,000 hrs at full load and 25°C ambient.
PHYSICAL SPECIFICATIONS
Weight
7oz
Dimensions
4(L) x 2(W) x 1.18(H) inches
101.6(L) x 50.8(W) x 30(H) mm
SAFETY & EMC
Safety Standards
UL/cUL UL60601-1, TUV EN60601-1, CB IEC 60601-1
EMC Standards
EN60601-1-2, FCC Part 18 Class B, EN55011 Class B, CE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]