PSD60 Datasheet, PDF (1/3 Pages) Wall Industries,Inc. – 60 Watt Dual Output AC/DC Power Supply

PSD60 Series
60 Watt
Dual Output
AC/DC Power Supply
FEATURES
● 2 Year Warranty
● LED Indicator for Power On
● 100% Full Load Burn-In Tested
● Cooling by Free Air Convection
● Universal AC Input / Full Range
● Built-In EMI Filter, Low Ripple Noise
● Fixed Switching Frequency at 54KHz
● High Efficiency, Low Working Temperature
● Soft-Start Circuit, Limiting AC Surge Current
● Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS: PSD60 Series
All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range
85 ~ 264VAC (120 ~ 370VDC)
Input Frequency
47 to 63Hz
AC Current (typical)
2A @ 115VAC 1A @ 230VAC
Inrush Current (typical)
Cold Start 20A @ 115VAC 40A @ 230VAC
Leakage Current
< 3.5mA @ 240VAC
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power
See Table
Voltage Tolerance (See Note 3)
PSD60-A: CH.1: ±2.0% CH.2: ±6.0%
PSD60-B: CH.1: ±2.0% CH.2: ±5.0%
Voltage Adjustment Range
CH.1: 4.75 ~ 5.5V
Line Regulation
PSD60-A: CH.1: ±0.5% CH.2: ±1.0%
PSD60-B: CH.1: ±0.5% CH.2: ±0.5%
Load Regulation (See Note 4)
PSD60-A: CH.1: ±0.5% CH.2: ±4.0%
PSD60-B: CH.1: ±0.5% CH.2: ±4.0%
Output Current
See Table
Ripple & Noise (max) (See Note 2)
See Table
Setup, Rise Time
300ms, 50ms @ 230VAC 800ms, 50ms @ 115VAC and full load
Hold Up Time (typical)
80ms @ 230VAC
10ms @ 115VAC and full load
Temperature Coefficient
±0.03%/°C (0 ~ 50°C) on +5V output
PROTECTION
Overload Protection
105 ~ 150% rated output power
Protection Type: Hiccup mode, recovers automatically after fault condition is removed.
Over Voltage Protection
5V: 5.75 ~ 6.75V
Protection Type: Hiccup mode, recovers automatically after fault condition is removed.
GENERAL SPECIFICATIONS
Efficiency (typical)
See Table
Switching Frequency
54KHz
Withstand Voltage
3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG)
Isolation Resistance
100MΩ/500DC (Input to Output, Input to FG, and Output to FG)
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
-10°C to +60°C (refer to output load derating curve)
Storage Temperature
-20°C to +85°C
Working Humidity
20 ~ 90% RH non-condensing
Storage Humidity
10 ~ 95% RH
Cooling
Free air convection
Vibration
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min each along X, Y, Z axes.
MTBF
301,200 hours min. @ 25°C (MIL-HDBK-217F)
PHYSICAL SPECIFICATIONS
Weight
540 grams
Dimensions
159(L) x 97(W) x 38(H) mm
Warranty
2 years
SAFETY & EMC (See Note 6)
Safety Standards
UL1012, UL60950, TUV EN60950 Approved
EMI Conduction & Radiation
Compliance to EN55022 (CISPR22) Class B
Harmonic Current
Compliance to EN61000-3-2,-3
EMS Immunity
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]